What to do if your Chevy Silverado ignition is locked?
Never forcibly turn or remove a key from a lock cylinder. Dirt that becomes trapped in and around the cylinder will also create a bind. Periodically, apply a small amount of Teflon lock cylinder lubricant to help ensure proper operation. Figure 1.
How to remove ignition lock cylinder without key?
Insert the screwdriver into the cylinder and turn it on the right as far as you can. After that, pull the paperclip on the far right as much as possible. Gently slide the switch out of its place. As simple as that, you will have removed your ignition lock from its place.
How do you unbolt a car ignition switch?
Unbolt the switch assembly and housing that contains the lock cylinder. Most of the car models have an interchangeable lock cylinder. These cylinders can easily be removed by inserting a pin into a pinhole using the release mechanism. Alternatively, you can turn an ignition key in the accessories position.
Why is my Chevy Silverado not turning on?
This rod can become lodged in place if it’s not retracted fully by the spring once the ignition lock cylinder recognizes the correct key has been inserted. When this happens, pressure applied to the ignition switch will prevent it from turning.
How do you remove ignition key cylinder?
To remove key cylinder from ignition switch, insert key in ignition switch and remove the torx screw on the side of the cylinder. Rotate the key one click clockwise and the key cylinder will unseat from ignition switch. When key cylinder is unseated, it will be approximately 1/8 inch away from ignition switch halo light ring.
How long does an ignition lock cylinder last?
Ignition lock cylinders typically last several years before problems develop, and they will likely be less of an issue in the future as more vehicles now are equipped with smart keys and push-button start that eliminate the need for a conventional key.
What is an ignition lock?
lock, ignition lock(noun) a restraint incorporated into the ignition switch to prevent the use of a vehicle by persons who do not have the key.
What is an ignition lock cylinder?
Ignition Lock Cylinder. The ignition lock cylinder is a mechanical part where the ignition key is inserted to start a vehicle. It’s mounted inside the ignition switch, the electrical component that locks the ignition and “reads” anti-theft coding in the key to allow the vehicle to start. Worn keys can damage “wafer” tumblers or pins inside…