What size socket do you use to remove a spark plug?
Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket.
What kind of socket do I need to remove spark plugs?
If a standard socket does not work, choosing a wobble socket may be a better idea. Wobble sockets are often essential equipment for removing iridium spark plugs.
What do you need to change spark plugs in car?
Tools Needed to Change Spark Plugs in a Car. Prev NEXT. Here you see a socket wrench with a spark plug socket, a pair of spark plugs and a gap gauge tool. You’ll need just a few tools to change out the spark plugs on your car. The most important tool is a socket wrench with an extension and a spark plug socket.
What should I use to gap my spark plugs?
While most modern spark plugs come pre-gapped from the manufacturer, a gapping tool is good to have on hand. You use a gapping tool to make sure the gap between the spark plug’s center electrode and the ground electrode above it are the right distance apart.
How do you remove a boot from a spark plug?
Squirt a liberal amount of spark plug boot grease into the boot then install the boot onto the spark plug. This dielectric grease prevents high voltage “flashovers” (voltage leaking out of the boot to ground) and makes future boot removal easier. Now that you’ve got the tools, let’s make sure you know the right parts.
If a standard socket does not work, choosing a wobble socket may be a better idea. Wobble sockets are often essential equipment for removing iridium spark plugs.
Tools Needed to Change Spark Plugs in a Car. Prev NEXT. Here you see a socket wrench with a spark plug socket, a pair of spark plugs and a gap gauge tool. You’ll need just a few tools to change out the spark plugs on your car. The most important tool is a socket wrench with an extension and a spark plug socket.
While most modern spark plugs come pre-gapped from the manufacturer, a gapping tool is good to have on hand. You use a gapping tool to make sure the gap between the spark plug’s center electrode and the ground electrode above it are the right distance apart.
How to soak spark plugs in Motorcraft?
Break the spark plugs loose when the engine is warm.2. Turn each plug 1/8 to 1/4 turn and soak the treads with 1/2 to 3/4 teaspoon of Motorcraft Carburetor Tune-Up Cleaner or a quality penetrating oil. Do not try to remove the plugs at this time.3. Let the threads soak for at least 15 minutes.4.