What size is the ICP sensor?
Outer Diameter: 1.43″ (36.2mm). Length: 2.55″ (64.8mm).
What happens if you unplug the ICP sensor?
If you unplug the ICP sensor while the truck is running, and nothing changes at all, then your sensor is bad. If the sensor was good and functioning, you should hear a change in the idle because the PCM will bump up ICP.
What is Ford ICP sensor?
The ICP sensor or Injection control pressure sensor is found on Ford’s Powerstroke 7.3 L diesel engines. The ICP sensor is responsible for monitoring oil pressure being passed on to the PCM to pressurized fuel injectors using the IPR (Injection Pressure Regulator) for proper vehicle operation.
How do I know if my 6.0 ICP sensor is bad?
Symptoms of a Bad or Failing Injector Control Pressure Sensor
- Starting issues. One of the first symptoms of a possible issue with the injector control pressure sensor is issues starting the engine.
- Engine misfires and decrease in power, acceleration, and fuel economy.
- Check Engine Light comes on.
What is a IPR sensor?
The IPR valve and ICP sensor work together as part of a feedback cycle to control the oil pressure to the injectors in the HEUI fuel system. The ICP reports the actual pressure to the PCM which then makes an adjustment in the position of the IPR valve to bring actual pressure into sync with desired pressure.
Can you unplug the ICP sensor?
The key to unplugging the ICP sensor as a test is to see if the engine runs better with it unplugged. If it runs worse, or if there’s no change, then leave the ICP sensor alone.
Can you clean ICP sensor?
Yes, the ICP sensor is on the head, no real special tools needed, But If your refering to oil on the the IPR plug, it and the inside can get oily, if it’s giving you problems it can be cleaned, and maybe work great again.
Does an ICP sensor cause no start?
Injector Control Pressure Sensor: When an ICP is failing, the engine runs extremely rough as load is imposed (under throttle), and the condition can eventually contribute to a 7.3L’s inability to start. If the engine runs smoothly with the connector unplugged, the ICP is bad.
What is Ford IPR valve?
The 6.0L Powerstroke IPR (Injection Pressure Regulator) is an electromagnetic valve that serves to regulate the high pressure oil that controls the diesel injectors. This tailors the fuel delivery characteristics of the injectors and is crucial for proper operation of your Ford 6.0L Powerstroke engine.
What are the symptoms of an ICP sensor problem?
Starting issues One of the first symptoms of a possible issue with the injector control pressure sensor is issues starting the engine.
What does ICP stand for in sensor?
ICP stands for “injection control pressure ” and the ICP sensor is just that, a sensor that tells the computer what the pressure is in the high pressure oil system.
Where is ICP sensor located?
The ICP sensor is located in the middle of the passenger side valve cover toward the front of the engine. Just unplug and unscrew. The PCM does not need to be reprogrammed, but it would not hurt to disconnect the power to the PCM and let it relearn engine parameters.
What is a Ford ICP?
The ICP sensor reads the pressure from the engine’s high pressure oil system. The Ford Power race, Navistar Internatonal and the Caterpillar engine use this type of sensors. The engine ECM uses this information to order the correct signal to the fuel injectors that will measure the delivery of fuel to the engine.