What should spark plug gap be on Tomos Streetmate A55?
Other modifications include; Spark Plug gap adjustment to 0.85mm, re-set the air mixture screw from 2½ to 1¾ rotations. This means, that not all models have been affected by these ‘problems’ as for engine running mostly.
Where does the blue wire go on a Tomos moped?
3) Check all grounds or bypass grounds- Mopeds, like older Tomos mopeds, do most of the grounding thru the rear taillight housing. Ground the blue wire to bypass this system on older Tomos Models and others to eliminate this ground issue.
What to do if your moped has a spark?
Most people replace the coil first because it is easy to replace, but seldom the problem. Below are a few tech tips to help determine the issue. on the new plug. 2) Remove cap from wire- wire should be able to arch a spark approx 1/4 to 1/2 when held near the cylinder or cylinder head.
Is there a recall on the tomos Streetmate A55?
Tomos Streetmate A55 – Information and Tuning Manual.doc – Dit document is auteursrechtelijk beschermd – 3 – Design Flaws and Recalls by Tomos Throughout the production line of the A52/A55 based vehicles, several mopeds built in a specific year where recalled by Tomos. It is, of course, completely normal that errors in new designs can occur.
3) Check all grounds or bypass grounds- Mopeds, like older Tomos mopeds, do most of the grounding thru the rear taillight housing. Ground the blue wire to bypass this system on older Tomos Models and others to eliminate this ground issue.
Other modifications include; Spark Plug gap adjustment to 0.85mm, re-set the air mixture screw from 2½ to 1¾ rotations. This means, that not all models have been affected by these ‘problems’ as for engine running mostly.
Tomos Streetmate A55 – Information and Tuning Manual.doc – Dit document is auteursrechtelijk beschermd – 3 – Design Flaws and Recalls by Tomos Throughout the production line of the A52/A55 based vehicles, several mopeds built in a specific year where recalled by Tomos. It is, of course, completely normal that errors in new designs can occur.
What do I need to test my moped spark?
Ground the blue wire to bypass this system on older Tomos Models and others to eliminate this ground issue. involve points and condenser. You will need a test light probe to test for a pulsed signal from the black trigger wire that comes from the magneto to the coil.