What should I do if my water pump stops working?
The majority of pumps have dry run protection, which cuts in to protect them from damage if the water supply is interrupted. If this protection kicks in, the pump will stop. You need to turn off the mains power to the pump for a few seconds to reset the pump (there will usually be an isolator switch or fused spur).
What to do when your water pump is not circulating coolant?
When you don’t feel the surge of coolant, squeeze the upper radiator hose again, and while an assistant depresses the accelerator to increase engine speed, release the radiator hose. If you still don’t feel the surge of coolant through the upper radiator hose, most likely coolant is not circulating.
Why does my well pump keep running continuously?
High energy bills and expensive breakdowns are just two of the side-effects of this unwanted phenomenon. Numerous different issues may cause a well pump to run continuously. The best way to get to the root of the problem is to hire an experienced plumber to make a diagnosis.
What to look for when replacing a Stanadyne pump?
If equipped with a fuel supply pump check for minimum of 2-3 psi fuel supply pump pressure. 2. Restricted fuel return 3. Return connector in injection pump plugged, due to governor coming apart. If you replace your injection pump, use the return connector from the replacement pump, the original connector may be plugged. 4. Water in fuel 5.
How to diagnose and repair water pump intermittent cycling?
This article explains how to diagnose & repair water pump intermittent cycling – the water pump comes on when no water is being run in the building. Intermittent water pump cycling means that the water pump comes on for no apparent reason.
What causes a water pump to intermittently run?
The most common causes of hidden causes of intermittent pump cycling: water is running somewhere in the building without notice, such as a running toilet. a leaky check valve or foot valve at the water pump or in the well.
What does it mean when your well pump keeps running?
“Priming the pump” means that the intake pipe on a jet system must always be filled with water (primed) in order to generate enough suction to pull water out of the well and into the household water line. If your well pump loses prime, then it will run constantly.