What should I do if my sunroof is not closing?
Place the ignition switch in RUN position. 8. Close all of the doors. 9. Press and release the vent switch (sunroof should move to vent position). 10. Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position. 11.
How do you close the sunroof on a Cherokee SRT8?
1. Place the ignition switch in RUN position. 2. Close all of the doors. 3. Press and release the vent switch (sunroof should move to vent position). 4. Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position.
How do you reset the sunroof on a Mercedes Benz?
Doors closed bonnet/hood and boot/trunk closed and engine running. There are some odd issues with resetting the one-touch operations of the sunroof and windows. For example, to reset a window, you have to first lower it, and then hold the switch in the second click up position for about five seconds after the glass is fully raised.
What causes a sunroof to get stuck in the ground?
The two main causes of a stuck sunroof are a lack of power and debris stuck in the sunroof’s tracks. Remove the glass from the sunroof to access the lift arms. The guides that the lift arms follow may need to be pushed forward if they have become stuck in the open position.
What to do if your sunroof is not open?
Once the sunroof has stopped motion at the vent position, press and hold the vent switch for at least 5 seconds to recalibrate the sunroof position. 11. If the sunroof did not reach the full vent open position, press and hold the vent switch until
What causes the sunroof on a car to not close?
If you can open and close the sunroof manually, then the motor is broken and needs to be replaced. Step 4 Check the sunroof wiring as a short can cause it to stop working.
How do you replace the J plate on a sunroof?
Replace the J plate and test that the lift arms move fully. Ensure that the sunroof motor is running properly. If there is no power to the motor, the sunroof will remain in the open position. Test the motor by inserting a screwdriver into the center of the motor at the nylon brushing. Turn and push on the screwdriver to work the motor manually.
How do you remove glass from a sunroof?
Remove the glass from the sunroof to access the lift arms. The guides that the lift arms follow may need to be pushed forward if they have become stuck in the open position. Use a screwdriver to push the guides forward so that the lift arms can fully close. Replace the glass once the lift arms are moving properly.