What should I do about my Hyundai Santa Fe airbag?
Disconnect the clock spring and horn connector, then remove the clock spring. If any improper parts are found during the following inspection, replace the airbag module with a new one. Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester.
What should I do about my Hyundai Santa Fe?
Hyundai Santa Fe DM 2013-2018 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Repair procedures 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.
How to change the clock on a Hyundai Santa Fe?
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from the battery and wait for at least three minutes before beginning work. 3. Connect the clock spring harness connector and horn harness connector to the clock spring. 4.
What should you do if your airbag deploys?
If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury. 1. Check pad cover for dents, cracks or deformities. 2. Check the airbag module for denting, cracking or deformation. 3. Check hooks and connectors for damage, terminals for deformities, and harness for binds.
How to remove SRS airbag control module on Hyundai Santa Fe?
How to remove srs airbag control module on a Hyundai Santa Fe 2017, 2018, 2019 How to remove srs airbag control module on a Hyundai Sonata 2017, 2018, 2019 How to remove srs airbag control module on a Jeep Cherokee 2015, 2016, 2017, 2018
How to install driver airbag on Hyundai Santa Fe?
Install the steering wheel column shroud and the steering wheel. 6. Connect the driver airbag (DAB) module connector and horn connector, and then install the driver airbag (DAB) module on the steering wheel. First, fix the wire on the fixing clip and then connect the connecter.
Hyundai Santa Fe DM 2013-2018 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Repair procedures 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.
Are there any recalls on Hyundai ABS modules?
And the 2018 and 2019 recalls had dealers installing relays in the fuse boxes to remove the electrical current when the vehicles were turned off. According to the class action, the alleged repairs are Band-Aids because the repairs did nothing to prevent fires while the vehicles were turned on.
Is there an air bag light on my Hyundai Santa Fe?
Vocational, Technical or Tra… I am working on a 2008 Hyundai Santa Fe that has the Air Bag indicator illuminated. There are two codes, B1 481 driver air bag resistance too … read more Have error code -1511 and the air bag light on. Replaced the Have error code B-1511 and the air bag light on.
What is the airbag code on a Santa Fe?
09 Hyundai Santa Fe gives us code b1481. We changed the 09 Hyundai Santa Fe gives us code b1481. We changed the airbag and it gives us still the same code. Is clock spring next? … read more
What to do if your Hyundai Santa Fe a / C is not working?
This way, you will know which services and Hyundai air conditioning parts to get to restore your A/C into the original working condition. Let’s proceed by taking a look at some of the most common Hyundai Santa Fe A/C problems: The A/C compressor is one of the most important components of any vehicle’s air conditioning system.
How does the climate control work on a Hyundai Santa Fe?
To regulate the temperature inside a Hyundai Santa Fe, the climate control system utilizes an ambient air temperature sensor (located outside the passenger compartment) and one or more in-vehicle sensors to measure the actual body temperature of your passengers and you.