What oil does a 2010 Mazdaspeed 3 take?
In fact, the recommended oil is 5W30 (the “30” meaning it has a higher temperature threshold). I looked in the manual to make sure. 5W20 is the recommended oil for regular Mazda 3s, but not the Speed.
Does a 2010 Mazda 3 need synthetic oil?
The 2010 Mazda Mazda3 uses 2.5 liters (2.6 quarts) of SAE 5W-30 engine oil. This is a very popular synthetic fluid suitable for a wide variety of engines in a large range of climates. Mazda recommends changing this fluid every 6,000 miles or 6 months, whichever You arrive to first.
What kind of oil does a Mazda 3 use?
The 2010 Mazda 3 2.5L engine oil capacity requires 5.3 quarts (5 liters). The 2010 Mazda 3 2.3L Engine requires 6 quarts (5.7 liters). Mazda approved engine oil for the 2010 Mazda 3 2.0L and 2.5L engine is the SAE 5W-20 oil. Mazda approved engine oil for the 2010 Mazda 3 2.3L engine is the SAE 5W-30 oil.
How to change the oil in a Mazda 6?
1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5.
Why did Mazda change the oil in the M / TS?
According to Mazda, some related parts were changed in the M/Ts due to the oil specification change. Consequently, if SAE 75W-90 is used in transmissions designed for SAE 75W-80, an increase in fuel consumption and harder shifting when cold can result.
How to replace transaxle fluid in Mazda 3?
The Automatic Transaxle Fluid (ATF) Replacement section specifies the proceedure as follows: 1. Remove the oil dipstick. 2. Remove the drain plug and washer from the transmission oil pan. 3. Drain the ATF and install the drain plug with a new washer.
The 2010 Mazda 3 2.5L engine oil capacity requires 5.3 quarts (5 liters). The 2010 Mazda 3 2.3L Engine requires 6 quarts (5.7 liters). Mazda approved engine oil for the 2010 Mazda 3 2.0L and 2.5L engine is the SAE 5W-20 oil. Mazda approved engine oil for the 2010 Mazda 3 2.3L engine is the SAE 5W-30 oil.
According to Mazda, some related parts were changed in the M/Ts due to the oil specification change. Consequently, if SAE 75W-90 is used in transmissions designed for SAE 75W-80, an increase in fuel consumption and harder shifting when cold can result.
The Automatic Transaxle Fluid (ATF) Replacement section specifies the proceedure as follows: 1. Remove the oil dipstick. 2. Remove the drain plug and washer from the transmission oil pan. 3. Drain the ATF and install the drain plug with a new washer.
Which is the correct service fluid for a Mazda 3?
ATF M-V (Type M5) is not the same fluid as Mercon V or Mercon LV ATF. ATF M-V (Type M5) has a greater viscosity than Mercon V and Mercon LV ATF at low temperatures. ATF M-V (Type M5) has a greater anti-judder specification than Mercon V and Mercon LV ATF. The correct Mazda Service Fluid is ATF M-V (Type M5) part #0000-77-112E-01.