What oil does a 2010 Honda Accord take?
The 2010 Honda Accord uses SAE 5w-20 full synthetic oil. The 2.4l engine has a capacity of 4.2 quarts while the 3.5l can hold 4.5 quarts.
Should I use synthetic oil in my 2010 Honda Accord?
The 2010 Honda Accord uses SAE 5w-20 full synthetic oil. You should get an oil change every 5,000 to 6,000 miles or 5 to 6 months. You will know that it is time for an oil change if You notice increased engine noise, shaking while idling, excess vehicle exhaust, or an oil smell inside the vehicle.
How do you reset the oil life on a Honda Accord?
While the OIL LIFE is displayed , press and hold the TRIP button until the OIL LIFE is flashing. While the OIL LIFE is flashing , release the TRIP button and press and hold again until the OIL LIFE is reset to 100%. Turn off the ignition.
Can you reset the oil Minder on a Honda?
Authorized Honda dealers will automatically reset your maintenance minder system as part of the service, but if you’ve changed the oil yourself or had the service performed elsewhere, you can manually reset the oil maintenance light with a few simple steps. Here are the instructions for resetting the oil maintenance light on a 2007 or newer Honda.
How do I Reset my Honda Accord immobilizer?
Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
How to reset the service wrench on a Honda Accord?
Honda Accord 2008-2012 Oil Wrench Service Maintenance Light 1 Close all doors. Gear to the park position. 2 Turn the ignition On (before starting the engine). 3 Continue to press the TRIP button until the OIL LIFE is displayed. 4 While the OIL LIFE is displayed , press and hold the TRIP button until the OIL LIFE is flashing.
Turn the ignition to run (one position before starting engine). Press the SELECT/RESET button until the engine oil life indicator is displayed. Press the SELECT/RESET button for more than 10 seconds. The engine oil life indicator and the maintenance code (s) will blink. Press the SELECT/RESET button for more than 5 seconds.
How do you reset the service light on a Honda Accord?
When the Engine Oil Life is 5% or lower, the “ SERVICE ” light will illuminate. Turn the ignition to the “ RUN ” position. Do not start the engine. Press the “ SELECT/RESET ” stem until the Engine Oil Life is displayed. Press and old “ SELECT/RESET ” for 10 seconds, then release the stem.
How do I reset the engine oil life?
If you change the oil in your Honda Accord, you will want to reset the Engine Oil Life and/or the “Main Reqd” light indicator. Just use these steps. Turn the ignition to the “ On ” position. Do not start the vehicle. Press the “ Select ” knob to toggle the setting to “ Engine Oil Life “.