What makes your voltage go up and down?
When the battery’s state of charge is low, the voltage is raised slightly to quickly put the charge back in. When the state of charge is high, the voltage is lowered slightly to prevent overcharging. If the vehicle has a voltmeter gauge, you may see the voltage move up or down. This is normal.
How can I tell if alternator is going bad?
7 Signs of a Failing Alternator
- Dim or Overly Bright Lights.
- Dead Battery.
- Slow or Malfunctioning Accessories.
- Trouble Starting or Frequent Stalling.
- Growling or Whining Noises.
- Smell of Burning Rubber or Wires.
- Battery Warning Light on Dash.
How to diagnose an alternator or electrical problem?
Diagnosing alternator problems can be a bit tricky because the electrical system in a car comes from two places, the battery and the alternator. I’ll give you a little background so you can understand what both systems do. The battery has one primary function, which is to start the car.
Is it normal to exceed generator amperage when idle?
With enough electrical loads “ON”, it is easy to exceed the generator current (amperage) output when the engine is at an idle of 600-700 RPM. This is a normal condition.
What makes my voltage gauge read low when the engine is running?
Oluseun, with the engine running the gauge should measure the output of your alternator. The low voltage may be indicative of issues with your alternator. If you have one of those that shows the voltage without the engine running, then check your gauge for a bad resistor on the dash panel.
What to do if your alternator is over charging the battery?
Ask an assistant to start the engine and hold engine speed at about 1500 RPM. Measure voltage across the battery with your DMM. You should get 0.5 to 2 volts higher than base voltage. If you are getting more than 2 volts above base voltage, most likely your alternator is over-charging the battery or the battery is faulty.