What kind of transmission is in a 1997 Jeep Grand Cherokee?
Jeep Cherokees for the 1997 model-year were equipped with one of four automatic transmission types, either the 30RH three-speed or 46RH, 42RE or AW4 four-speed.
How do you adjust the transmission band on a Jeep Grand Cherokee?
Jeep Grand Cherokee Front Band (kickdown) Adjustment
- Disconnect the negative cable on the battery.
- Raise the front of the vehicle with a jack.
- Locate the adjusting screw locknut on the left side of the transmission.
- Tighten the screw to the specified torque with a torque wrench.
- Hold the screw with a pair of pliers.
How much is a new transmission for Jeep Grand Cherokee?
The cost of a new Jeep Grand Cherokee transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less expensive, in some cases costing less than $150.
Can you fix a transmission slip?
Transmission bands can wear out and cause slipping. To fix this problem, the defective bands should be replaced. Sometimes the bands are fine and only need adjustment. Bands and clutch plates throughout the transmission and in the torque converter may become worn or burned out from inadequate transmission fluid.
Why does my Jeep Grand Cherokee not shift gears?
For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually. The most common cause of transmission problems is the easiest to fix: check the fluid level in the transmission and restore it to the proper levels.
Can a Jeep Grand Cherokee Drive in two gears?
You’re often still able to drive the vehicle, but it only operates in one or two gears. For example, you may find that you’re only able to drive the car in the automatic transmission’s third gear, only being able to select the other two gears when you shift the transmission manually.
Is there a problem with my Jeep Grand Cherokee?
Very often, this will solve the problem. But Jeep Grand Cherokees seem especially prone to more serious transmission problems, and some owners are quite vexed at their inability to determine the causes.
What do the flashes on a Jeep Cherokee mean?
There will be two sets of flashes, separated by a pause. The number of flashes in each group indicates the first and second digit in the flash codes. A code 55 identifies the end of flash code transmission. Below, you’ll find the list of Transmission Fault Codes for Jeep automatic transmissions.