What kind of transmission fluid does a Suzuki use?
Use an automatic transmission fluid SUZUKI ATF 3317 or Mobil ATF 3309. Driving with too much or too little fluid can damage the transmission. You must check the fluid level with the automatic transmission fluid at normal operating temperature.
How to check the transmission fluid in a 2006 Suzuki Forenza?
Neither of the Forenza’s available transmissions have a dipstick to check the fluid level — you must check it via a check-and-fill plug on the transmission. Drive the Suzuki for about three miles to circulate the fluid through the transmission, then park the vehicle on a level surface.
How do you check the fluid level in a Suzuki?
3) Park your vehicle on level ground. 4) Apply the parking brake and then start the engine in “P” (Park). Let it idle for two minutes and keep it running during the fluid level check. 5) With your foot on the brake pedal, move the gearshift lever through each gear, pausing for about three seconds in each range.
How do you check the transmission fluid level?
To check the fluid level: 1) To warm up the transmission fluid, drive the vehicle or idle the engine until the temperature gauge indicates normal operating temperature. 2) Then drive for ten more minutes. Be sure to use the specified automatic transmission fluid.
Neither of the Forenza’s available transmissions have a dipstick to check the fluid level — you must check it via a check-and-fill plug on the transmission. Drive the Suzuki for about three miles to circulate the fluid through the transmission, then park the vehicle on a level surface.
Use an automatic transmission fluid SUZUKI ATF 3317 or Mobil ATF 3309. Driving with too much or too little fluid can damage the transmission. You must check the fluid level with the automatic transmission fluid at normal operating temperature.
3) Park your vehicle on level ground. 4) Apply the parking brake and then start the engine in “P” (Park). Let it idle for two minutes and keep it running during the fluid level check. 5) With your foot on the brake pedal, move the gearshift lever through each gear, pausing for about three seconds in each range.
To check the fluid level: 1) To warm up the transmission fluid, drive the vehicle or idle the engine until the temperature gauge indicates normal operating temperature. 2) Then drive for ten more minutes. Be sure to use the specified automatic transmission fluid.
Can a Suzuki dealer change the transmission oil?
After checking or adding oil, be sure to insert the dipstick securely. Since special procedures, materials and tools are required to change the automatic transmission oil, it is recommended that you trust this job to your authorized SUZUKI dealer.
How to check your automatic transmission fluid level?
Insert long funnel into automatic transmission fluid dipstick hole. Carefully add automatic transmission fluid in small increments and recheck level each time until fluid level reaches “warm” line.
What happens if you have too much fluid in the transmission?
Driving with too much or too little fluid can damage the transmission. You must check the fluid level with the automatic transmission fluid at normal operating temperature. To check the fluid level: 1) To warm up the transmission fluid, drive the vehicle or idle the engine until the temperature gauge indicates normal operating temperature.
What kind of fluid do you use for automatic transmission?
Be sure to use the specified automatic transmission fluid. Using automatic transmission fluid other than SUZUKI ATF 3317 or Mobil ATF 3309 may damage the automatic transmission of your vehicle.
What’s the best way to check your transmission fluid?
Insert long funnel into automatic transmission fluid dipstick hole. Carefully add automatic transmission fluid in small increments and recheck level each time until fluid level reaches “warm” line. CAUTION: DO NOT OVERFILL OR SPILL AUTOMATIC TRANSMISSION FLUID ON HOT ENGINE PARTS! Reinsert automatic transmission fluid dipstick fully. You’re done!