What kind of timing belt does Mazda 626 use?
Mazda 626 – V6 Timing Belt & Water Pump Part 1 – YouTube Going through the steps of a timing belt and water pump change on a 2.5L V6 KL-DE engine. The same engine is used on the Mazda 626, MX-6, Millenia, and Ford…
How do you change the timing belt on a Mazda?
6) Support the engine and remove the right-side engine mount. 7) Before you go any further, confirm that your timing marks are in the correct location. 8) Using an Allen wrench, turn the tensioner clockwise to permit removal of the timing belt tensioner spring from its pin on the block.
When did Mazda make the move to timing chains?
Mazda made the move to timing chains in the mid-2000s, and since we won’t get into the nuts and bolts of chain replacement, you would be better served referring to your service information. I’m always saying to check your service info before you dig into an unfamiliar job. It is never more important than it is in this case.
Is it safe to remove the crank bolt on a Mazda?
Since removing the crank bolt releases the crank gear, allowing it to rotate on the shaft, the only safe way is to install the locking tools. Like any other chain, there can be some teething problems, and Mazda had some when it went to chains.
How to tell the timing belt interval on a Mazda?
Once you know, you can determine your Mazda timing belt interval by using the first table and the reference key. Be sure to look at the second table to see whether or not the engine is interference-fit. 1.8L DOHC 4 Cyl. 1.8L SOHC 4 Cyl. 2.3L 4 Cyl.
How often should I replace my timing belt?
A worn inner bushing may allow the pulley to slant resulting in a torn or jumped belt. {32} – On 1993-96 models, replace every 60,000 miles. On 1997-2006 inspect at 60,000 miles, then again at 90,000 miles. It is recommended but not required, but it should be replaced at 105,000 miles. Questions? We can help.
Mazda 626 – V6 Timing Belt & Water Pump Part 1 – YouTube Going through the steps of a timing belt and water pump change on a 2.5L V6 KL-DE engine. The same engine is used on the Mazda 626, MX-6, Millenia, and Ford…
How much does a timing belt replacement cost?
The local Mazda dealer’s service manager agrees with you, so it looks like my budget will have to stretch to include a timing belt replacement package ($800 at the dealer). Big expense for a car valued at about $4,000, but less than buying a new/used car.
When to replace timing belt on Toyota Corolla?
More than likely, it will tell you that the timing belt needs to be replaced at 105k miles or 105 months, whichever comes first. (105 months=8 years and 9 months) “On most cars– for example on my Corolla – there’s a way to inspect the timing belt without taking everything apart”
Can a timing belt snap 10 minutes later?
Please ignore that suggestion, as a timing belt can look to be in perfect condition and it can snap 10 minutes later. The only thing that timing belt inspection is good for is to see if the belt is in visibly bad condition before it even gets to the specified interval for changing it.