What kind of engine does a 2006 Ford LCF have?
Salvage, cab & chassis, powerstroke diesel engine, automatic transmission, single axle~ny. 2006 ford lcf, 6 cyl diesel, auto, 10′ 3″ cab to axle, 167″ wheel base, 19. 5 wheels, truck cranks up and runs but smokes, no lights on rear of truck so truck needs to be hauled.
When did the Ford low cab forward LCF come out?
The low cab forward LCF also permits you to attach different units for specialized applications such as landscaping, towing and construction. After it was launched in 2006 as a totally fresh model, the Ford LCF received a few modifications in 2007 when Ford has improved the driver comfort and the ride quality.
What can you do with a Ford LCF?
The Ford LCF is sold together with the F- Series and E-Series being part of the company’s lineup of commercial vehicles. The low cab forward LCF also permits you to attach different units for specialized applications such as landscaping, towing and construction.
What is Tow Haul mode on Ford LCF?
The Ford LCF is also equipped with a tow haul mode which improves the truck’s ability to tow big loads up and down steep grades. The system works by automatically adjusting the shift points to keep the engine to its maximum power range with minimum gear changes.
What kind of Turbo does a Ford LCF use?
However, it uses a sequential twin-turbocharger system, instead of the single variable-geometry turbocharger used in the VT365. It is used in the 2006 Ford LCF (Low Cab Forward) and International CF (Cab Forward) (later CityStar) series trucks.
What kind of engine does the International VT275 have?
International VT275 Engine 4.5-Liter MaxxForce VT275 PowerStroke A variant of the VT365 is the VT275 4.5 L V-6, which is basically a 6.0 L V-8 with two cylinders chopped off. However, it uses a sequential twin-turbocharger system, instead of the single variable-geometry turbocharger used in the VT365.
How are cylinders replaced in a VT275 engine?
All the internal wearable parts such as bearings, gaskets, pistons will be replaced with Brand New. The Cylinders are bored back to OE Spec, if the cylinders cannot be bored within OE spec then the block is not used. The Crankshaft, camshaft, connecting rods are all replaced with either Remanufactured components or Brand New.
How many axles does a Ford LCF have?
The Ford LCF is offered with four axle-to-frame, five cab-to-axle, and five wheelbase lengths. The range of Ford LCF configurations includes multilength van and dump truck units, stake trucks, tow trucks and utility vehicles.
How big is a 2006 Ford LCF dump bed?
Equal opportunity lender. 2006 Ford LCF 245 V-6 power stroke, Auto trans., Hyd brakes, 16′ dump bed with fold down side on right front for pallets, 19.5 tires, 155k miles. DALLAS, TX
Where does the Ford LCF car come from?
The vehicle has been developed as part of the Blue Diamond joint venture and is assembled in Mexico at the joint venture’s Escobedo facility. The Ford LCF is sold together with the F- Series and E-Series being part of the company’s lineup of commercial vehicles.
When did the Ford LCF truck come out?
Unsourced material may be challenged and removed. The Ford LCF ( Low Cab Forward) is a medium-duty cabover truck that was marketed by Ford Motor Company from 2006 to 2009.
What was the criticism of the Ford LCF?
It was widely criticized for its noisy engine, fuel consumption, lack of head and foot room (due to the placement of the steering column), and a dealer network who were uneducated on the product. The trucks many times sat, unsold, for several years.
Who are the competitors for the Ford LCF?
The LCF is an all new platform for Ford Motor Company that will be available in Class 4 & 5. The competition is Isuzu’s LCF which currently controls a 75% share of the LCF market.
What is rotunda tool number for 2006 LCF?
The Rotunda tool number for this is 418-D553A. Diagnosing the LCF is similar to diagnosing the F650/750. The Master Diagnostics “MD Truck” software when loaded into the WDS operates with when connected to the 9-pin ATA (Deutsch) connector.
How does master diagnostics diagnose a LCF truck?
Diagnosing the LCF is similar to diagnosing the F650/750. The Master Diagnostics “MD Truck” software when loaded into the WDS operates with when connected to the 9-pin ATA (Deutsch) connector.