What kind of engine does a 1997 Camaro have?
Under the hood, the V8 engine was a new option that produced 305 horsepower and also was found in the 1997 Corvette C5. Four-wheel disc brakes were included as a standard feature on all models.
What kind of car was the 1987 Chevy Camaro?
The 1987 Camaro LT option incorporated most of the Berlinetta’s equipment except the electronic instrumentation. Late in the model year, the 1987 Chevrolet Camaro RS was introduced as a test for California and with only V-6 power.
Which is the sibling of the Camaro convertible?
The Camaro Coupe is the sibling of Camaro Convertible. Having the same characteristics as the fourth generation Chevrolet Camaro Z28 (F-body platform, 5.7 L V8), the distinctive feature of the model was its cargo volume-32.6 CuFT in comparison to 7.57 CuFT of the Camaro Convertible.
What was the total number of Camaros produced in 1998?
Total production for 1998 was just 48,495 units in total. This is the first year that the SS model was actually manufactured solely by Chevrolet in twenty years! The 1999 model year saw only a few minor changes made to the Camaro. These included the introduction of new colors such as “Hugger Orange”.
4) in 1997 the model with 3-door hatchback coupe body and V-6 3791 cm3 / 231.4 cui engine size, 149 kW / 203 PS / 200 hp (SAE net) of power, 305 Nm / 225 lb-ft of torque, 4-speed automatic powertrain offered since mid-year 1996 for North America .
What are the torque specifications for a Chevy Camaro?
10.85 Gen IV – REAR Caliper Bleeder Valve Type: 43.39 Gen I/II – Front Flex Hose to Caliper Type: 40.67 Gen IV – FRONT Brake Hose to Caliper Banjo Bolt Type: Bolt 29.83 Gen IV – REAR Brake Hose to Caliper Banjo Bolt Type: Bolt 12.5 16.95 Type: 12.5 16.95 Type: Brake Master Cylinder To Power Brake Booster 32.54 Type: 32.54 Type: 13.56
What are the torque specs for the cylinder head and intake manifold?
Install NEW cylinder head retaining bolts and tighten in sequence in four steps: Step 1: Tighten to 70-90 Nm (52-66 ft. lbs.). Step 2: Back off all bolts 360 °. Step 3: Tighten to 45-55 Nm (34-40 ft. lbs.). Step 4: Tighten to 85-99 Nm (63-73 ft. lbs.). Over the entire cylinder head gasketsurface. Intake Manifold
What are the headlights for a 1997 Camaro?
THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, ‘LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.’ THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH. DOPE, INC.
10.85 Gen IV – REAR Caliper Bleeder Valve Type: 43.39 Gen I/II – Front Flex Hose to Caliper Type: 40.67 Gen IV – FRONT Brake Hose to Caliper Banjo Bolt Type: Bolt 29.83 Gen IV – REAR Brake Hose to Caliper Banjo Bolt Type: Bolt 12.5 16.95 Type: 12.5 16.95 Type: Brake Master Cylinder To Power Brake Booster 32.54 Type: 32.54 Type: 13.56
How big is the wheelbase of a 1997 Camaro?
The 1997 Chevrolet Camaro measures 74.10 inches in width, 193.20 inches in length, and has a wheelbase of 101.10 inches. The 1997 Chevrolet Camaro accounted for 9.8% of Chevrolet’s 491665 production.
THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, ‘LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.’ THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS. DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH. DOPE, INC.
What kind of bolts are in a Camaro?
8.02 Type: 108.47 Gen IV – REAR Lower Control Arm to Rear Axle – BOLTS Type: Bolt 81.35 Gen IV – REAR Lower Control Arm to Rear Axle – NUTS Type: Bolt 108.47 Gen IV – REAR Lower Control Arm to Body – BOLTS Type: Bolt