What kind of coils do Kawasaki Kz1000 use?
Instructions for installing Dyna coils on KZ1000′s and other four cylinder motorcycles are below. The 1973-1978 Z1, KZ900 and KZ1000′s use the green 3 ohm dyna coils. The coils work with dyna aftermarket electronic ignitions and will also work with the stock points if ballast resistors are installed.
How do you sand a Kawasaki Kz1000?
Just enough to get a good ground connection between the bar and the clamp. Next, bolt the top clamps on, install the handlebar controls, hand grips etc. and you should be set to go! If these parts aren’t sanded the bike will probably run fine EXCEPT the turn signals might not work consistently or they might not work at all.
Why are the handlebars on a Kawasaki Kz1000 coated?
Aluminum handlebars are coated to prevent corrosion and the coating can block electricity conduction. The solution – use sandpaper (300 or 400 grit works fine) and scuff up the bar where it fits in the riser and also clean the paint off the riser. Above you can see the aluminum handlebar in the triple clamp.
What to use to clean Kawasaki Kz1000 triple clamp?
The solution – use sandpaper (300 or 400 grit works fine) and scuff up the bar where it fits in the riser and also clean the paint off the riser. Above you can see the aluminum handlebar in the triple clamp.
What are the parts of a Kawasaki Kz1000?
Cam Chain Tensioner Damper Rubber OEM Ref # 92075-289 Stock Type Shock Absorber Set, Replaces OEM # 45014-072 350mm Eye to Eye This was the factory style on the Kawasaki Z1 73-75, but will also fit KZ900 and KZ1000 models for those looking to add on the side reflector. Rear Brake Master Cylinder Repair Kit OEM Ref # 43020-1019
What was the top speed of a Kawasaki kz1000p7?
Contact User:Budlight if you need help. The Kawasaki KZ1000P7 was a in-line four, four-stroke Road motorcycle produced by Kawasaki between 1977 and 1988. It could reach a top speed of 130 mph (210 km/h). Max torque was 6.86 ft/lbs (9.3 Nm) @ 7000 RPM. Claimed horsepower was 99.91 HP (74.5 KW) @ 8500 RPM.
How big is the gas tank on a kz1000p7?
The front suspension was a telescopic air assisted spring and oil damped while the rear was equipped with a classic swinging arm twin shocks. The KZ1000P7 was fitted with a 5.81 Gallon (22.00 Liters) fuel tank. The bike weighed just 661.39 pounds (300.0 Kg). The wheelbase was 59.25 inches (1505 mm) long.
Why is it important to maintain a Kawasaki?
They undergo comprehensive evaluation to ensure the hightest quality and durability standards to help maximize the life of your vehicle, and give you peace of mind that your Kawasaki is always operiating at peak performance. The proper maintenance of your Kawasaki vehicle is the best way to ensure that it operates at its full potential.