What kind of battery wire does a Jeep Grand Cherokee use?
A starter lug cover is included. The negative cable is 30 inches with a 16″ lead for chassis ground. The fuse block is 4 gauge wire with a single hole heavy duty 90 end. The wire is heavier gauge than the factory wire for reduced voltage drop.
What kind of lug cover does a Jeep Grand Cherokee need?
A lug cover, 8 gauge 5/16 lug (for modifying the Jeep “Y” cable), a terminal for the starter solenoid, heat shrink, anti-corrosion bolts, and battery washers are included with purchase. IMPORTANT NOTE: Some minor modifications may be needed.
What kind of battery cable do I need for a Jeep ZJ?
Intended as a replacement negative cable for Jeep XJ or ZJ. 30 inch 2 ga (or 1 ga if mil) black cable w 5/16 lug (battery to engine block – attaches at coil bracket). 16 inch lead for chassis ground. Anti-corrosion battery washers. Batteries leak acidic fumes around the post. Use these washers to help prevent corrosion.
How big is the Starter Cable on a Jeep Grand Cherokee?
The positive cable is a 40 inch long cable with a 5/16 starter lug and a 22-inch #4 lead with a 90 degree 5/16 heavy duty lug for connecting to the fuse block. A starter lug cover is included.
How do you remove the battery from a Jeep Grand Cherokee?
Use a stool to reach it if you can’t work comfortably standing on the ground, because it’s pretty high on a Jeep Grand Cherokee. Loosen the bolt on the black negative battery cable first with a box wrench or cable clamp pliers. Wiggle the cable end off the post and tap it gently with a small hammer if it won’t budge.
Where is the positive cable on a Jeep Grand Cherokee?
Track the red positive cable to its connection on the starter solenoid on the front passenger side of the engine and remove it with a wrench. Clean the posts with a small wire brush or cable cleaner. Wipe off any residual dust with a clean, dry cloth. Attach the new positive cable first, reversing the process in Step 3.
What’s the best way to clean a car battery?
If you use the baking soda mixture instead of cleaner, mix 1 tablespoon of baking soda into 1 cup of water. Thoroughly rinse the battery with clean water to remove all of the solution. Wear gloves and safety goggles for protection from acid when working with a battery.
Why do my battery cables keep coming back?
A white, chalky substance caked on your battery cable ends that keeps coming back after you replace the cables might mean it’s time to replace the battery and not just the cables.
Where is the negative cable on a Jeep ZJ?
If your negative cable grounds to the engine at the coil bracket right behind the alternator, then you should purchase the ZJ with the 30 inch negative kit. IMPORTANT NOTE: Some minor modifications may be needed.
How to diagnose erratic behavior of a Jeep Cherokee?
If this one is gone… count on wierd engine behavior! On RENIX (Non-HO) 4.0L engines you should be on extra alert regarding your TPS ground wire! Check for leakage / high-resistance and if necessary install a jumper ground wire direct from the TPS side of the connector direct to the firewall ground.
What kind of fuse box cable do I need for Jeep Grand Cherokee?
An 8 gauge 5/16 lug for modifying the negative “Y” cable and a piece of heat shrink is also included in the kit. You may need to modify the cover to the fuse box to get it to close over the larger battery-to-fusebox wire.
A starter lug cover is included. The negative cable is 30 inches with a 16″ lead for chassis ground. The fuse block is 4 gauge wire with a single hole heavy duty 90 end. The wire is heavier gauge than the factory wire for reduced voltage drop.
An 8 gauge 5/16 lug for modifying the negative “Y” cable and a piece of heat shrink is also included in the kit. You may need to modify the cover to the fuse box to get it to close over the larger battery-to-fusebox wire.
The positive cable is a 40 inch long cable with a 5/16 starter lug and a 22-inch #4 lead with a 90 degree 5/16 heavy duty lug for connecting to the fuse block. A starter lug cover is included.
If your negative cable grounds to the engine at the coil bracket right behind the alternator, then you should purchase the ZJ with the 30 inch negative kit. IMPORTANT NOTE: Some minor modifications may be needed.