What is the value of treble bleed?
Good working values to try are from 220 pF up to 1500 pF for the cap, and 100k-ohm up to 330k-ohm for the resistor. Our third treble-bleed network, shown on the right, consists of a cap with a resistor in series.
What does the resistor do in a treble bleed circuit?
Resistors are components which resist the flow of electrical current. When used in a treble bleed circuit they attenuate the high frequencies to keep the signal frequency balanced.
Does Silver Sky have treble bleed?
It includes our special Treble Bleed circuitry to give your upgraded instrument unequaled performance. Want MORE From Your PRS Silver Sky? Your stock PRS Silver Sky and Silver Sky Limited only has 5 pickup tones.
What are treble bleeds?
A treble-bleed (high-pass) circuit allows the highs to “bleed” (or pass) through the volume pot even as it is turned down. “It’s a common modification people have been doing for a while,” said Jonathan Parrish, a Fender engineer who designed the treble-bleed circuits in the American Professional Series guitars.
What capacitors does Gibson use?
Some of Gibson’s 2014 model year guitars use Orange Drop capacitors (Fig. 1). Stroll around the net, and some folks say Orange Drop capacitors are the magic ingredient for vintage tone, while others say “designer” capacitors are just hype-as long as the value meets the spec, it doesn’t matter what you use.
What is treble bleed?
A treble-bleed (high-pass) circuit allows the highs to “bleed” (or pass) through the volume pot even as it is turned down. To bring back some of those lost lows, you could also add a resistor to the circuit along with the capacitator.
Are 500K pots louder than 250K?
The rule is: Using higher value pots (500K) will give the guitar a brighter sound and lower value pots (250K) will give the guitar a slightly warmer sound. This is because higher value pots put less of a load on the pickups which prevents treble frequencies from “bleeding” to ground through the pot and being lost.
What are the capacitor values on a treble bleed circuit?
The capacitor values are very small, usually 0.001 µF or less and are usually of the ceramic disc variety. The higher the values are, the brighter the tone will get as the Volume gets turned down. The resistors range from 80k to about 300k and higher values lead to a brighter tone. There are three versions of the treble bleed circuit
Can a treble bleed circuit be installed on a guitar?
There is a simple and very cheap fix for this problem, and it is well worth doing. The solution is to install a treble bleed circuit to your guitar, which can be either a single capacitor or a combination of a capacitor and a small resistor.
What should volume pots be for treble bleed?
If your playing style depends heavily on this effect, you might want to try it out before you make the treble bleed mod permanent. The common values for volume pots are 250k for single coil pickups and 500k for humbucker pickups, but you can use any value from 250k to 1 mega-ohm if your ear says it sounds right.
Is the Fender Tone saver a treble bleed circuit?
Fender have recently marketed a “Tone Saver” that they sometimes claim is not a simple treble bleed circuit, sometimes claim is a simple treble bleed circuit. but when cut open features, can you guess? Yep, a 1.2 nF cap and a 130 kΩ resistor in a fancy package that costs 10 times more than the practically identical Stew Mac product.