What is the R-value of blown in attic insulation?
2.2 to 2.7 per inch
Blown-in fiberglass has an R-value of 2.2 to 2.7 per inch. Batts. Fiberglass batts and rolls are ideal for placement between framing during construction in floors, walls, attics, and ceilings.
What R value is 6 inches of insulation?
Fiberglass Insulation Batts Fiberglass blankets or rolls provide an R-value of up to 3.2 per inch, so a 6-inch fiberglass batt may achieve an R-value of 19.2, and some high-performance products are rated at R-21.
How many inches is R38 blown insulation?
Fiberglass Chart
| R-Value | Thickness | Bags / 1000 Sq Ft |
|---|---|---|
| R49 | 16.25” | 22.6 |
| R44 | 14.75” | 20.1 |
| R38 | 12.75” | 16.8 |
| R30 | 10.25” | 13.0 |
What is the best R rating for ceiling insulation?
Generally, climates that need to keep the heat in require higher R-Values. Insulation in Zones 1 and 2 typically require an R-Value of 3 or 4 while properties in zones 3 to 7 will require an R-Value of at least 5.
How much of a difference does attic insulation make?
One of the places in your home where a little bit of attention can make a big difference in your comfort — and heating bill — is the attic. According to the Department of Energy, properly insulating the attic can save 10 to 50 percent on a typical heating bill.
How many inches of insulation do I need in my attic?
The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
What is the recommended your value for an attic?
Currently, the recommended R value for attic insulation is between 6.1 and 7, a combination of thickness and conductivity. Knowing where you stand with the recommended R value for attic insulation will ensure that you receive the right insulation for your home.
What is the best your value in insulation?
The insulation with the highest R value is, perhaps ironically, nothing at all. That is to say, a vacuum provides the most ideal insulation. Vacuum insulated panels have an R value of as high as 50, compared to approximately three for conventional fiberglass insulation.
What are value do I need for attic?
Your home’s R-value score will guide you toward the type of insulation you need. In general, an attic’s R-value should be between R-30 and R-49. In particularly cold climates, you might go up to R-60.
Which insulation has the highest R-value?
Answer Wiki. Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.