What is the earthing requirement for swimming pools?

What is the earthing requirement for swimming pools?

2.6. 2, where the pool structure is conductive, (concrete pools are considered to be conductive) all conductive parts that are directly or indirectly in contact with the ground and that are within arm’s reach (1.25 metres from the inside edge of the pool) are required to be bonded to earth.

Does a swimming pool need a ground rod?

YOU DO NOT NEED TO INSTALL GROUND RODS OR RUN THE #8 BONDING CONDUCTOR BACK TO THE SERVICE OR SUB PANEL. (For 12IN burial depth, the conductors must be GFCI protected at the house, if they are not GFCI protected, the burial depth must be at least 18IN.)

What if pool is not bonded?

Bonding connects the pool’ s electrical and non-electrical metal components into a network that contains the electricity. Without a bonding system in place, you might conduct stray electrical current when touching the metal pool rail or pool water.

Do all above ground pools need to be bonded?

Local state and federal building codes require all permanent above ground pools to get correctly bonded. A lot of people mistakingly call this grounding the pool; While that is somewhat true, bonding is a little different.

What happens if a pool is not bonded?

If you do not bond your pool equipment there is the risk that the equipment itself will become the anode in a galvanic couple with other metal components in or around your pool. If this happens, the anode metals will deteriorate at an advanced rate, a phenomenon called galvanic corrosion.

Should an above ground pool be grounded?

Posted on November 26, 2019 November 21, 2019 , in Above Ground Pools. But with all these electrical components combined with the metal parts of the swimming pool itself comes the potential for great danger. Swimming pools must be properly grounded and bonded to prevent this danger.

How do I know if my pool is electrified?

How to test pool water for electricity? One way to test pool water for electricity is to use a device called shock alert. It will notify you if there is electricity present in the water. If it beeps and flashes red, it means there is a presence of electricity in the water and you should not swim in it.

What happens if a pool isn’t grounded?

Without a grounding system in place, people or pool equipment may become the conductor. Harmful electrical current may move toward people, pets, or equipment instead of moving away and to the earth.

Can you get electrocuted in a pool?

You can get electrocuted in a swimming pool as a result of: (1) faulty electrical wiring to pool equipment such as underwater lights, pumps, filters and vacuums; (2) no GFCI (Ground-Fault Circuit-Interrupters) protections for outlets and circuits; and (3) electrical appliances and extension cords entering the water.