What is the difference between hydraulic clutch and cable clutch?
A cable clutch is pulled in and out by a cable from the pedal to the lever which operates it. A hydraulic clutch has a cylinder at the pedal like the brakes and feeds fluid to another cylinder which pushed the lever to move the clutch in and out.
How to change hydraulic clutch on Harley Davidson?
As the oil was draining, the old clutch housing and lever were removed from the bars, and the cable was removed from the bike. 3. Then the new hydraulic cover with “6-Speed” logo was installed. 4.
What is the new H-D hydraulic clutch kit?
1. Here is the new H-D hydraulic clutch kit, which includes a new cover, lever, master cylinder and cap cover, and new hydraulic line. If you don’t have stock handlebars, make sure to get the right length, or you may come up short. 2. To get started, the oil was drained from the trans, and then the old cover was removed.
How to install an easy pull clutch kit?
Replace the exhaust by first attaching the headers to the cylinder head exhaust stud with the 1/2-inch nuts. Tighten the nuts to 60 to 80 inch-pounds using a torque wrench. Tighten the nuts on the bracket that hold the mufflers to the frame between 30 to 33 foot-pounds using a torque wrench. Lower the lift. Katie Cole started writing in 1996.
How do you replace clutch cover on Harley?
Replace the clutch cover gasket and derby cover, using the torque wrench to tighten the bolts between 84 to 108 inch-pounds. Use a 1/2-inch socket or wrench to loosen the nuts that hold the header pipe onto the cylinder head exhaust studs. Remove the bracket that secures the mufflers to the frame by removing the 1/2-inch nuts.
How do you install a clutch on a Harley Davidson?
Pull the exhaust system off the motorcycle. Remove the transmission filler plug and transmission drain plug and drain the transmission fluid into an oil drain pan. Replace the O-ring on the transmission drain plug and put the plug back into the transmission, using a torque wrench to tighten the plug to 14 to 21 foot-pounds.
What is included in a hydraulic clutch kit?
Includes master cylinder, transmission end cover, throw out bearing and push rod Clutch line not included. Master cylinder has a 10mm banjo bolt. Order a universal brake line to fit your application and hydraulic clutch hose adaptor part no. H19-0263 (sold separately) to hook up to the AN-3 fitting on the other end of the universal brake line.
What kind of brake line do I need for a hydraulic clutch?
Master cylinder has a 10mm banjo bolt. Order a universal brake line to fit your application and hydraulic clutch hose adaptor part no. H19-0263 (sold separately) to hook up to the AN-3 fitting on the other end of the universal brake line. Filler plug hole threads are 3/4 in.-16
Replace the exhaust by first attaching the headers to the cylinder head exhaust stud with the 1/2-inch nuts. Tighten the nuts to 60 to 80 inch-pounds using a torque wrench. Tighten the nuts on the bracket that hold the mufflers to the frame between 30 to 33 foot-pounds using a torque wrench. Lower the lift. Katie Cole started writing in 1996.