What is P1166 code mean?

What is P1166 code mean?

|P1166 HONDA Possible Causes Faulty Air/Fuel Ratio Sensor 1. Air/Fuel Ratio Sensor 1 harness is open or shorted. Air/Fuel Ratio Sensor 1 circuit poor electrical connection.

What was the error code on my Honda Accord?

I used to have both P1166 and P1167 error codes on my 2001 Honda Accord (F23A4 engine). I fixed the P1166 by replacing the O2 sensor. For about a day, everything looked wonderful (i.e. no check engine light on). Then, (after a day), the dreaded check engine light turned on again.

What does the P1167 Honda engine code mean?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P1167 HONDA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

How much does it cost to repair a Honda p1166 code?

The cost of diagnosing the P1166 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

What does the book say about p1166 and P1167?

The book says that both P1166 and p1167 is defined as the primary air/fuel sensor heater malfunction (not secondary). – shuva Nov 3 ’17 at 6:46 The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM).

I used to have both P1166 and P1167 error codes on my 2001 Honda Accord (F23A4 engine). I fixed the P1166 by replacing the O2 sensor. For about a day, everything looked wonderful (i.e. no check engine light on). Then, (after a day), the dreaded check engine light turned on again.

How much does it cost to diagnose Honda code P1167?

The cost to diagnose the P1167 HONDA code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

What does P1167 stand for in EVAP code?

The heater element is on until the engine is at normal operating temp then it switched off. P1167 is the upstream O2 sensor just before the cat. If it is anything like a evap code where the computer has to relearn the sensors parameters under varying load conditions by doing tests etc.

The book says that both P1166 and p1167 is defined as the primary air/fuel sensor heater malfunction (not secondary). – shuva Nov 3 ’17 at 6:46 The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM).