What is OBD port on car?
An OBD port is simply a space that is uniquely designed for connecting the OBD reader to it. When you take your car to the mechanics, this is the outlet where they plug in the OBD equipment. Nevertheless, their equipment usually consists of a long cable and a computer that lets them access your car’s information.
How do I disconnect OBD connector?
First remove the housing by reaching behind, pinching the sides and pushing it towards the floor. Once that part is out, the piece will be dangling by the wiring harness. Now the actual port can removed from the plastic housing by pulling the harness backward out of it (i.e. up, towards your dash).
Where are the OBD connectors located on a Honda?
An example would be a manufacturer that locates the connector under the passenger side of the dash in 1996, doesn’t mean that the next year it wouldn’t be under an ashtray or somewhere else. Additionally, some connectors are located upside down, so some attention needs to be paid to this factor when trying to connect.
Where are the computer connectors on a Honda Accord?
There are seventeen typical auto computer connector locations. They are: Behind an ashtray. Bottom dash, above the hood release. Dash on right, underneath. Driver side of dash, above hood release-left hand side of instrument panel. Front of center console, driver side. Front of center console, passenger side.
Where is the check connector on a Honda Civic?
To access the DTC memory, connect a jumper wire between the check connector terminals. On Accord and Civic models, the check connector is located under the RH side of the instrument panel. On 90–91 Prelude models equipped with 2.1L engine, the check connector is located in the engine compartment.
Where is the check connector on a Honda Prelude?
On 90–91 Prelude models equipped with 2.1L engine, the check connector is located in the engine compartment. On 92–95 Prelude models, the check connector is located in the passenger compartment behind the center console. On all models, turn the ignition On. The ECM indicates stored DTCs by flashing the malfunction indicator/Check Engine lamp.
An example would be a manufacturer that locates the connector under the passenger side of the dash in 1996, doesn’t mean that the next year it wouldn’t be under an ashtray or somewhere else. Additionally, some connectors are located upside down, so some attention needs to be paid to this factor when trying to connect.
There are seventeen typical auto computer connector locations. They are: Behind an ashtray. Bottom dash, above the hood release. Dash on right, underneath. Driver side of dash, above hood release-left hand side of instrument panel. Front of center console, driver side. Front of center console, passenger side.
Which is plug under the dash is the Factory Brake Controller?
The location for the plug should be under the steering column toward the left. If you have the factory brake controller adapter it will plug into the plug under the dash and the bare wires will be attached to the brake controller color to color.
Where are the OBD connectors on an Acura NSX?
The key thing to remember, is that since 1996, all auto computer code connectors are found somewhere inside the front passenger compartment. 1999-2001 Acura Integra. Covered? Honda NSX. Covered? 2005 Acura RL. Covered? Covered? Left edge of dash, left of hood release, facing down. Left edge of dash, left of hood release, facing down.