What is manufacturer control Auxiliary emission controls?
p1408 is==manufacture control auxiliary emission controls which means that it refers to egr system, it may be a loose wire or it needs taken off and cleaned or replaced. if taken off and cleaned make sure carbon is removed at engine where it moun ts.
What is auxiliary output?
» AUXILIARY OUTPUT. Definition: An additional output from a sound desk which can be used for foldback or monitoring without tying up the main outputs. Each input channel will have a path to the Aux buss. Also used for feeding a signal to an effects processor.
What is manufacturer control mean?
OBD II fault code P3000 is a manufacturer specific code that is defined as “Manufacturer Controlled DTC – Manufacturer Controlled”, and is set when the PCM (Powertrain Control Module) detects a failure, defect, or malfunction in a part, component, system, or subsystem that is associated with the definition a particular …
What is the purpose of auxiliary outputs?
A contact output that can be used to output alarms, results of logic operations, program end signals, etc.
What is auxiliary input and output?
AUX connections (input or output) Alongside the inputs for various players such as Blu-ray players and connections for the speakers themselves, the most important input on the amplifier or compact system is called AUX or auxiliary. This is simply an audio input to which you can connect players of your choice.
Can AUX output be used as input?
You can’t make an output into an input. You do have the CD/DVD input that is the same as an aux input. Both are line level inputs. The only input that usually can’t be used as an aux input is a phono input.
What is 3.5 mm auxiliary input?
The most common is a 3.5 mm jack, which is the same type of tip-ring-sleeve (TRS) or tip-ring-ring-sleeve (TRRS) connector used to connect headphones. Anytime you see “aux input” on a head unit, home theater receiver, or audio interface, it refers to this type of input—a male-to-male 3.5 mm TRRS cable.
What are P codes in Hcpcs?
HCPCS Modifier Codes for Procedure, Supply & DME (Durable Medical Equipment) Codes (“P” Codes): P1 A NORMAL HEALTHY PATIENT HCPCS Modifier Code Code. P2 A PATIENT WITH MILD SYSTEMIC DISEASE HCPCS Modifier Code Code. P3 A PATIENT WITH SEVERE SYSTEMIC DISEASE HCPCS Modifier Code Code.
What is GPS P code?
Each satellite has a unique pseudo-random code. The C/A code is the basis for civilian GPS use. The second pseudo-random code is called the P (Precise) code. It repeats on a seven day cycle and modulates both the L1 and L2 carriers at a 10MHz rate. This code is intended for military users and can be encrypted.
What are aux in and AUX Out used for?
Enjoy unlimited reading and listening on any device. Assuming this is an amplifier that you’re on about, aux in is for input signals from devices that give a high level output, say from CD player, TV, phone headphone socket. It “expects” a higher level signal than a mic input.
Why do you need an auxiliary audio input jack?
Assuming you are looking at a car stereo system, manufacturers put those in so that you can connect any other music or communication device without having to get under the dash. This started happening in ther mid-00’s when the smartphone was coming out and iPods as well as other portable devices were replacing the CD and radio.
What’s the difference between aux in and Mic port?
Than there is the aux port which is for things with both speakers and a mic. Assuming this is an amplifier that you’re on about, aux in is for input signals from devices that give a high level output, say from CD player, TV, phone headphone socket. It “expects” a higher level signal than a mic input.