What is bank1 intake camshaft?
While problems with these systems can set several different codes, P0011 refers to the “A” camshaft in bank one. The “A” camshaft is the intake camshaft on the left or front of the bank from the perspective of the driver. Bank one is the bank of cylinders that contains cylinder one.
What causes the p0011 code on a Nissan?
Tech notes Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code.
What does trouble code p0011 mean on an ECM?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0011? What Is The Cause Of Code P0011?
Why does my Nissan Altima have a trouble code?
If your Altima has the P0011 trouble code it will typically not pass the State emissions tests. The Nissan Altima utilizes camshaft actuators to change the valve lift depending on the RPM of the motor. This allows for a more efficient cam profile at any speed.
What does p0011 code mean on oil life reset?
Press the “INFORMATION” button to scroll through until “OIL LIFE RESET” is displayed. Press and hold “RESET” button until “ACKNOWLEDGED” is displayed. Turn the ignition off. and had P0011 code we replaced cam shaft sensor it went away for a day and engine light came back again. Any suggestions please?
What does engine code p0011 mean?
A P0011 code refers to the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module) or ECM (engine control module). VVT is a technology used in the engine to allow it to get greater power or efficiency at different running points.
What does diagnostic trouble code p0011 mean?
P0011 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Advanced or System Performance (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
What is a code po420 on Nissan Altima?
The P0420 code in a Nissan Altima will often be thrown one of your oxygen sensors are not functioning properly. Typically, the code will be triggered by the upstream oxygen sensor (before the converter). There aren’t usually any drivability issues associated with P0420.
What is this code p0011?
- or valve issues of the camshaft oil control valve for the bank 1 intake camshaft.
- Check the engine for it to be full of clean engine oil with the correct viscosity.
- The technician will scan and document the codes received and view the freeze frame data to see when the code was set.