What is a clinker style boat?
Clinker built (also known as lapstrake) is a method of boat building where the edges of hull planks overlap each other. A contrasting method, where plank edges are butted smoothly seam to seam, is known as carvel construction.
What is a clinker hull?
The framing gives carvel construction a stronger hull, allowing it to carry a full sail plan and have a longer, broader hull. Clinker built (or lapstrake) vessels are lighter as they have less internal framing – with the planks overlapping along their edges.
What is the meaning of clinker built?
clinker-built in British English or clincher-built. adjective. (of a boat or ship) having a hull constructed with each plank overlapping that below. Also called: lapstrake.
What was the clinker technique?
Clinker or Lapstrake is a method of attaching planks to a boat where the plank edges overlap each other. Overlapping planks are then fastened to each other and then to the frames. This age old method of planking, sometimes referred to as clinker planking, has been in use for hundreds of years.
Why did Vikings use the clinker method?
Nordic clinker-built ships and boats were developed hundreds of years before Viking ships. The ships’ strength lay in this method of construction. The clinker-built boards, or the overlap between two boards, act as a longitudinal strengthening element in the hull. This allows for a greater distance between the frames.
What is the use of clinker?
Clinker is primarily used to produce cement. Since it can be stored in dry condition for several months without noticeable deterioration, it is traded internationally in large amounts. Cement manufacturers buy clinker for their cement plants in areas where raw materials for cement are scarce or unavailable.
Where did the term clinker come from?
clinker (n.) “mass of slag,” 1769, from klincard (1640s), a type of paving brick made in Holland, from Dutch klinkaerd, from klinken “to ring” (as it does when struck), which is of imitative origin (compare clink (v.)).
What kind of boat is a ply clinker?
This style of clinker boat is built upright when planked traditionally. The ply clinker and strip-planked versions are easier built upside-down. A ply clinker version was next, built in a Summer School class, and proved to be an excellent rowing boat like the traditional one, being lighter it was marginally faster, except against a headwind.
Are there any drawbacks to building a clinker ship?
However, the only drawback is that clinker ships move less swiftly through water than any other boat of the same size. Once more type of boat that follows the same method of construction is Carvel boat.
How did the first clinker boats get built?
The earliest clinker boats were built by creating an outer mold, which would include a transom and an inner keel for support. The earliest lapstrake construction didn’t have any predetermined number or width of the planks. The planks were then placed and nailed together to the mold until the correct look was achieved.
Is the clinker dinghy easy to set up?
The unstayed mast and the balanced lug rig are very easy to set up, and it takes just 20 minutes to get ready to sail. The dinghy proved easy to launch by floating on and off the trailer on the slipway. The boat has good stability and builds confidence.