What is a brake transmission interlock?
The brake shift interlock is a crucial safety feature which ensures that the vehicle will not be shifted out of park without first having the brake pedal depressed; this keeps the vehicle from being accidentally shifted into reverse or drive by an errant driver or passenger, including children who may successfully move …
What is the torque converter part number on a Jaguar?
In fu.ture, all converters supplied from Jaguar Spares Division will have the correct setscrews attached. The part number of the Torque Converters with out-a…-ays are as folloWB:- 2.4 litre model All models except 2. 4 litre Part Number 0.17080 (supersedes 0.13773) 0.17085 (supersedes 0.10986) Contimed ••• Jaguar Cars Limited 2005 FiG. I
How does the shift interlock solenoid work on a car?
In addition to the brake pedal being pressed down, the ignition must be in the on position. The shift interlock solenoid is on all modern vehicles, and works in conjunction with the brake light switch and neutral safety switch.
Where is the bleed valve on a Jaguar?
(All Automatic Transmission Yodels) With effect from November, 1960 the bleed valve at the bottom of the multiple disc clutch cylinder in the low drum is omitted. The omission of the bleed valve does not affect the operation of the transmission.
Where is the cut-a-1ay machined in a Jaguar?
To ensure f’ul.l engagement of’ the long er thread, a cut-a.1ay is machined in the torque converter below each threaded hole as indica. ted by the arrow in Fig. 2. Note that it is ABSOLUTELY ESSENTIAL that the lone; setscrews whiah are 17/32″ (13.5 Dm) in length (see inset in Fig.2.) are not
Why does the parking brake not disengage on a 2005 Jaguar?
Re: parking brake will not disengage on 2005 jaguar s… Although a temporary workaround, disconnecting the battery and/or control module to release the park does not resolve why it became locked-on in the first place. The problem with many many S-types has been a failure of the park brake motor.
In addition to the brake pedal being pressed down, the ignition must be in the on position. The shift interlock solenoid is on all modern vehicles, and works in conjunction with the brake light switch and neutral safety switch.
Do you need to change the rear pads on a Jaguar?
For those who want to change the rear pads Jaguar recommend that the EPB (hand brake) is calibrated as detailed below. procedure in this bulletin. Failure to do this may result in incorrect operation of the Park brake, with warning lamps
How do you reset the EPB on a Jaguar?
This indicates that the parking brake is in calibration mode. 5. Lightly press the footbrake pedal. 6. Apply the parking brake by using the EPB switch. 7. Release the parking brake. 8. Release the footbrake.