What happens to the oil in an Ironhead bike?
When you crank or start the engine oil is then forced out the breather. As long as it stops after a minute or two you are probably OK. The longer the bike sits between starts the more oil there will be.
What kind of parts are in a 1979 Harley Ironhead?
1979 HARLEY DAVIDSON IRONHEAD SPORTSTER no money spared on this build. Kustom Tech, Lowbrow Customs, Biltwell, Old Stuff Cycles, Acme choppers, David bird, Led Sled, LC Fab, S&S, anti gravity. Just to name some of the custom parts used on this build. Runs and Rides great.
What kind of motorcycle can you build into a Bobber?
Because of this, some makes and models of motorcycle lend themselves better to being built into a bobber. An air-cooled, carbureted motorcycle like a vintage Triumph offers less hurdles than a bike that is water-cooled with a large radiator and loads of electronics.
Is the Ironhead bike from the 70’s?
THIS BIKE IS A PRETTY COOL LOOKING PIECE FROM THE 70’S, IT EVEN HAS A CHROME FRAME, FRONT AND REAR FENDERS TOO.. SO WITH A LITTLE TLC AND A FEW HOURS SOMEONE COULD MAKE IT A VERY SPECIAL RIDE…
Who are the battery manufacturers and brand names?
Battery Manufacturers and Brand Names List Battery Manufacturers and Brand Names List http://www.jgdarden.com/batteryfaq/batbrand.htm#E[7/24/2009 11:56:06 AM] BATTERY MANUFACTURERS AND BRAND NAMES LIST Bill Darden Last Updated on A
Which is better a 79 or 79 swingarm?
Answer: Although the 79 swingarm makes a better installation, it is not absolutely necessary.
What to use to clean threads on ironheadcycle?
Get a couple of the big swingarm bearing retainer jamb nuts, make sure the threads are good, clean them up with a thread file if need be. Get something sharp and pointy and drag it through the thread valleys on the swing arm, you’ll be sort of re-cutting the threads by hand.
When you crank or start the engine oil is then forced out the breather. As long as it stops after a minute or two you are probably OK. The longer the bike sits between starts the more oil there will be.
Get a couple of the big swingarm bearing retainer jamb nuts, make sure the threads are good, clean them up with a thread file if need be. Get something sharp and pointy and drag it through the thread valleys on the swing arm, you’ll be sort of re-cutting the threads by hand.
Answer: Although the 79 swingarm makes a better installation, it is not absolutely necessary.
Which is the correct way to adjust the headlight?
For this reason, it’s important to check your owner’s manual and follow those guidelines. There should be one screw at the top of the headlight to adjust vertically and another screw to one side of the headlight to adjust horizontally, though some cars may feature adjustment bolts rather than screws.
Which is better cast iron or aluminum cylinder heads?
Aluminum is usually the preferred material for cylinder heads – not only is it lighter than cast-iron, it also dissipates heat better. Harley-Davidson had previously used aluminum heads on their Big-Twin Panhead motor, which helped reduce engine operating temperatures in warm weather.
Why are my headlights misaligned on the side of the road?
If all you can see is the foliage on the side of the road, or oncoming drivers are constantly flashing their high beams or honking their horn at you, most likely your headlights are misaligned and giving those other drivers an eyeful.
What are the different types of head lights?
If you’re looking for a replacement or an upgrade, in this article we discuss the different types of headlights available on the market today. The four common types of automotive headlight bulbs are halogen, LED, Xenon/HID, and Laser.
What’s the difference between hid and xenon headlights?
Meanwhile, HID is short for high-intensity discharge, which is how xenon lights function. Basically, HID headlights beam a light-emitting plasma that forms through a combination of xenon gas and vaporized salt, which are activated on an arc by a ballast in the range of 30,000 V and sustained in the voltage range of 80 to 100 V.
Is there an upgrade kit for HID headlights?
Consequently, HID headlights could fail to properly beam in older vehicles that were built to house halogen bulbs. To this day, few upgrade kits have been developed with any degree of light placement or shielding.
Why do HID headlights work on dark roads?
If a motorist happens to be intoxicated, the reckless nature of their driving will be clearer and evident from a greater, safer distance, which will give you time to pull your car away from that driver’s trajectory. Additionally, HIDs make it easier to read driving signs on dark roads.
Is the last thread on the swing arm good?
Hopefully at least the last thread or two on the swing arm is good so you can at least start the big nuts.