What happens if the speedometer on my Chevy Silverado fails?
If the speedometer failed and the vehicle is within 7 years had less than 70,000 miles on it, upon proper proof of claim GM will reimburse the cost of repairs (parts and labor) up to the limit of what a GM dealership would have charged.
Where can I buy stepper motors for my Chevy Silverado?
These GM stepper motors are not available from GM dealers or retail parts stores such as O’Reilly’s, Autozone or others. Be aware of generic brand stepper motors produced in China, numerous problems have been seen with these aftermarket motors.
What kind of display does a GM speedometer have?
Most GM gauge clusters of this time frame have two digital displays – the odometer and the gear indicator (commonly called the PRNDL screen). Either one or both screen will typically be affected. This common issue is not actually a problem with the digital displays themselves as they seem to be quite reliable. 1. Dim, Dark or Dead Display
Are there any accidents due to erratic speedometers?
No deaths or injuries were ever attributed to the erratic gauges, but owners of the vehicles felt the problem was a safety concern. In 2007, Kevin Zwicker filed suit against General Motors in U.S. District Court in Seattle seeking three types of compensation:
If the speedometer failed and the vehicle is within 7 years had less than 70,000 miles on it, upon proper proof of claim GM will reimburse the cost of repairs (parts and labor) up to the limit of what a GM dealership would have charged.
What kind of motor is a GM stepper?
A direct replacement for the XC.168, X15.168 and X25.168 commonly found in 2001-2006 General Motors instrument clusters. The stepper motor is a patented stepping motor design, which has a 4 gears design construction in order to guarantee high efficiency, high position accuracy and a robust gear system.
Most GM gauge clusters of this time frame have two digital displays – the odometer and the gear indicator (commonly called the PRNDL screen). Either one or both screen will typically be affected. This common issue is not actually a problem with the digital displays themselves as they seem to be quite reliable. 1. Dim, Dark or Dead Display
How to repair GM instrument cluster you speedometer?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: gEkQxckitdPl441V)
How big is a 6.6 liter Duramax diesel engine?
LBZ Duramax Specifications Manufactured Years: 2006-2007 Displacement: 6.6 Liters or 403 Cubic Inches Engine Weight: 835 Lbs Bore: 4.055″ or 103 mm Stroke: 3.897″ or 99 mm
What kind of filter does a Duramax diesel use?
These kits provide the correct amount of fluid and spin on external filter for 2001-2019 Duramax diesels using standard Allison transmission pans. 2 Gallons of Allison Transynd synthetic fluid- (We have found this fluid to be far superior to anything else available.)
What are the symptoms of a bad transmission speed sensor?
Symptoms of a Bad or Failing Transmission Speed Sensor. 1 1. Harsh or Improper Shifting. Without a valid speed signal from these sensors, the PCM will not be able to correctly control the shifting of gears 2 2. Cruise Control Does Not Work. 3 3. Check Engine Light Comes On.
Can you change the shift points in a transmission?
Changing the shift points in the transmission will do nothing for the giddy up and go off of the line. What you can do with shift points is make sure that the transmission shifts to the next gear so that the engine is starting out in the next gear at about 300 to 500 RPM before maximum torque.
When did GM stop using the Allison Transmission?
GM sold Allison Transmission in 2007, although Duramax powered pickups continue to use their transmissions. Moderate changes have occurred to the transmission throughout the years however the platform itself has, for all intents and purposes, remained the same since 2001.
No deaths or injuries were ever attributed to the erratic gauges, but owners of the vehicles felt the problem was a safety concern. In 2007, Kevin Zwicker filed suit against General Motors in U.S. District Court in Seattle seeking three types of compensation:
Why does my speedometer needle keep getting stuck?
This is usually the first gauge problem the vehicle owner sees and is experienced as a stuck, sticky or jumpy gauge needle. Occasionally the needle will reset itself temporarily after the ignition switch has been turned on and off a few times but soon returns to it’s erratic behavior.
Where is the speed sensor on a GMC Sierra?
112 people found this helpful. I replaced the vehicle speed sensor VSS then unplugged the vehicle speed sensor buffer VSSB (a 3 inch square flat white plastic sensor box) located behind the glove box, I unplugged it and waited 5 minutes before plugging it back in.
Why does my Sierra truck not shift gears?
2003 Sierra-My truck is doing the same thing- speedo reads zero and won’t shift out of first. I cleaned the MAS, replaced shift sensor, made sure trans fluid was full, disconnected and reconnected the battery, and now I am thinking of replacing the stepper motors for the speedo but don’t think that covers the shifting issue.
These GM stepper motors are not available from GM dealers or retail parts stores such as O’Reilly’s, Autozone or others. Be aware of generic brand stepper motors produced in China, numerous problems have been seen with these aftermarket motors.