What does trouble code p0872 stand for?
A P0872 trouble code refers to a problem detected by the Powertrain Control Module (PCM) with the fluid pressure within the transmission. Some vehicle PCMs place the transmission into Limp-in mode in addition to storing a code and illuminating the Check Engine light. Related trouble codes include a P0870, P0871, P0873, and P0874 code.
How much does it cost to repair GMC p0872 pressure switch?
The cost of diagnosing the P0872 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. Transmission will not shift gears.
What does a p0877 transmission fluid pressure sensor mean?
If the ohmmeter readings do not pass, replace the TFPS. If all prior tests have passed and you continue to get a P0877, this would most likely indicate a failed TFPS sensor, although a failed PCM/TCM could not be ruled out, nor could internal transmission malfunctions until the TFPS sensor had been replaced.
What causes DTC p1711 to change to p0872?
Over torquing the Transmission Fluid Pressure Switch (TFP) may result in shorting out the TFP and setting DTC P1711 or P0872. If the “E” switch changes to OFF, the condition may be intermittent and the DTC flow chart should be followed to see if another condition can be found for the DTC P1711 or P0872.
The cost of diagnosing the P0872 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. Transmission will not shift gears.
What does a p0877 code mean on a transmission?
A P0877 code can result in the PCM putting the transmission in limp-in mode, meaning the vehicle will barely be drivable at all. Often, a P0877 code is an indicator of other problems in the transmission. When this code is registered, it’s imperative to have the transmission checked and serviced soon to avoid further damage.
What happens when you get the po872 code?
P0872 has shown that in most cases trucks that set this code have had a cracked transmission adapter housing. Bulletin 03-07-30-031 contains details on the adapter housing repair. Cracks in the adapter housing can allow dirt and sand to enter the transmission resulting in stuck shift valves in the valve body.
Over torquing the Transmission Fluid Pressure Switch (TFP) may result in shorting out the TFP and setting DTC P1711 or P0872. If the “E” switch changes to OFF, the condition may be intermittent and the DTC flow chart should be followed to see if another condition can be found for the DTC P1711 or P0872.
What does p0872 transmission fluid pressure sensor switch C circuit low?
If all prior tests have passed and you continue to get a P0872, this would most likely indicate a failed TFPS sensor, although a failed PCM/TCM could not be ruled out, nor could internal transmission malfunctions until the TFPS sensor had been replaced. If unsure, seek assistance from a trained automotive diagnostician.
What are the possible causes of the p0847 code?
P0847 Possible Causes 1 Faulty Transmission Fluid Pressure Sensor/Switch ‘B’ 2 Transmission Fluid Pressure Sensor/Switch ‘B’ harness is open or shorted 3 Transmission Fluid Pressure Sensor/Switch ‘B’ circuit poor electrical connection
What does a p0847 TFPs sensor tell you?
If all prior tests have passed and you continue to get a P0847, this would most likely indicate a failed TFPS sensor, although a failed PCM/TCM could not be ruled out, nor could internal transmission malfunctions until the TFPS sensor had been replaced. If unsure, seek assistance from a trained automotive diagnostician.
A P0872 trouble code refers to a problem detected by the Powertrain Control Module (PCM) with the fluid pressure within the transmission. Some vehicle PCMs place the transmission into Limp-in mode in addition to storing a code and illuminating the Check Engine light. Related trouble codes include a P0870, P0871, P0873, and P0874 code.
How to know if your transmission fluid pressure sensor is p0872?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0872 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
What are the symptoms of a p0847 engine code?
Symptoms of a P0847 engine code may include: Vehicle starts off in 2nd or 3rd gear (limp in mode) Typically the causes for this code to set are: Short to ground in the signal circuit to the TFPS sensor – possible Failed TFPS Sensor / internally shorted – likely
How much does it cost to diagnose a p0847 code?
The cost of diagnosing the P0847 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. The Transmission Control Module (TCM) monitors the Transmission Fluid Pressure Sensor/Switch signal.
What does it mean when Honda Odyssey says p0700?
It is possible to get the P0700 code without any other code registering with your Honda Odyssey. If you get no other code it means that the transmission control circuit is malfunctioning.
What does OBDII code mean on GMC Acadia p0700?
In the case of the P0700, it is a general code. This means that it should be accompanied by some other code that should tell you the specific problem. It is and OBDII code and not just GM code. If you are scanning your vehicle right now, you should be looking for a second code that tells you what is actually wrong.
What causes DTC p0700 transmission to malfunction?
Depending on year, make, and model, DTC P0700 may have number of causes. Here are some of the most common. Electrical Problems – As with all systems in the modern automobile, electrical and electronic signals need good wiring for proper transmission.