What does the P warning light mean?

What does the P warning light mean?

The brake warning light features a red circle with an exclamation point or “P” in the middle, or simply the text “BRAKE”. When illuminated, this light indicates that either the parking brake is engaged or that there is an issue with the braking system.

What does P mean on Canon printer?

The printer detects the position of the FINE cartridge holder by the encoder film. If the film is smeared, the holder position cannot be detected properly, resulting in Error P, 0, 2. Check the encoder film condition and clean it if it is smeared, while following the procedures below.

How do I clear the error code on my Canon printer?

Reset the Canon printer

1. Switch on the printer.
2. Press and hold the Stop/reset button.
3. Press the button that you use to make a color copy and hold it down.
4. Wait 5 seconds.
5. The printer now reboots and sets itself up.
6. Does the printer indicate that the device needs to be calibrated?
7. You’ve reset your printer.

Where is the reset button on a Canon printer?

The reset procedure of the Canon printer is very simple. Find the Stop button on the control panel of the printer. Press the Stop button and hold it for a few seconds. Do not release it until the Orange color Alarm lamp blinks 21 times.

What does the orange flashing light mean on my Canon printer?

Meaning: the printer is out of paper / No paper. Solution: Reload paper in the rear tray and press the Resume / Cancel button. Meaning: the paper exit tray is closed / Paper jam. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.

What does the yellow lightning bolt mean?

The yellow lightning bolt symbol indicates that the Raspberry Pi is not receiving enough power. So now that we know what the lightning bolt means, we still need to know how much power your Raspberry Pi needs.

How do I reset my Canon Pixma printer to factory settings?

1 Factory Reset

1. Press Setup.
2. Press the arrow buttons until you navigate to Device settings and then press OK.
3. Press the arrow buttons until you navigate to Reset setting and then press OK.
4. Press the arrow buttons until you navigate to Reset all and then press OK.
5. Select Yes.
6. Press OK. Your device is now reset.

How to resolve printer error with flashing light?

Count the number of flashes, then click on the Support Code link in the right column to learn how to resolve the error message. Printer error has occurred. Printer error has occurred. An error requiring a repair has occurred. Other cases than above. Printer error has occurred.

When does the information warning light turn on?

Information Warning Light Indicator light will turn on when a new message is stored in the information display. It will be red or amber in color depending on the severity of the message and will remain on until the cause of the message has been rectified.

When does the warning light on my car turn on?

Indicator light usually accompanied by another warning light and indicates that one or more warning systems have been detected. Click Indicator light will turn on when a new message is stored in the information display.

What does the warning light on the dash mean?

If an indicator light on your dash is on, visit your local AutoZone store to get the best products and information to help keep your vehicle running in top condition. Click a vehicle warning light to see more detailed information. Indicates the engine computer has set a Diagnostic Trouble Code (DTC).