What does the maintenance required light mean on a 2000 Honda Accord?
It is simply a reminder that you should service the car at least every 7,500 miles which is what the Owner’s Manual recommends. Before you can reset it, you need to wait until the light comes on and stays on (i.e. not flashing, but constantly illuminated)
How to reset Honda Accord maint REQ’D light at home?
Select “Maintenance Reset” using the arrow buttons, then press the SEL/RESET button. Select “Reset” using the arrow buttons, then press the SEL/RESET button. The maintenance item code(s) will disappear and the engine oil life will reset to “100”.
How do you reset the Maintenance Minder on a 2012 Honda Accord?
2012-2015 w/ Multifunction display: Set power mode to ON. Select “Vehicle Settings” in the display using the arrow buttons located on the steering wheel, then press the SEL/RESET button. Select “Maintenance Minder Reset” using the arrow buttons, then press the SEL/RESET button.
How do you reset the ignition switch on a Honda Accord?
Turn the ignition switch to the ON (II) position. Select “Vehicle Settings” in the display using the arrow buttons located on the steering wheel, then press the SEL/RESET button. Select “Maintenance Reset” using the arrow buttons, then press the SEL/RESET button. Select “Reset” using the arrow buttons, then press the SEL/RESET button.
How do you reset the lights on a Honda?
Observe the instrument panel to make sure the warning light or lights have shut off. Press and hold the reset button, located under the odometer. Turn the ignition key to the “on” position while still depressing the reset button. Hold the button until the light turns off.
How do I reset the required maintance light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I Turn Off the maintenance required light on my Honda?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.