What does the bolt pattern on a Jeep Wrangler mean?
So the bolt pattern will not only tell you how many studs or holes there are, but it will also tell you the spacing between them. If you imagine the lug nuts form an invisible circle, it’s a bit easier to conceptualize. Both the JK and JL Wrangler have 5-lug wheels with 5-inch spacing, meaning the bolt pattern would be 5 x 5 inches.
How do you change the belt on a jeep?
As you are standing at the front of your Jeep facing to the rear, you want to use your wrench/bar to rotate the belt-tensioner arm clockwise (depicted by blue arrow below); this will be towards the ground in most cases. This removes the tension from the belt.
Where to find belt routing diagram on Jeep?
Now, locate your “Belt Routing” diagram, which is a decal that should be affixed to the top of the radiator or on the sheet metal under the hood somewhere quite visible. After finding the routing decal, locate belt tensioner.
How big of a hole do you need for a jeep serpentine belt?
I have had numerous reports from readers that in 2002 Jeep changed the belt-tensioner square hole size to 1/2″. So, you may need a 3/8″ or a 1/2″ breaker-bar depending on what year your vehicle is. SAFETY GLASSES! 1 Serpentine Belt (I use Goodyear Gatorback P/N 4060882)
What kind of bolt pattern does a Jeep Wrangler have?
That’s because, while most Jeeps have a five lugs, different models have different spacing between the lugs. For example, all JK Wrangler vehicles (2007-18) have a 5×5 bolt pattern – meaning five lugs with a five inch spacing. Earlier TJ Wrangler models (1997-06) and YJ editions (1987-95) employ a 5×4.5 pattern.
As you are standing at the front of your Jeep facing to the rear, you want to use your wrench/bar to rotate the belt-tensioner arm clockwise (depicted by blue arrow below); this will be towards the ground in most cases. This removes the tension from the belt.
Now, locate your “Belt Routing” diagram, which is a decal that should be affixed to the top of the radiator or on the sheet metal under the hood somewhere quite visible. After finding the routing decal, locate belt tensioner.
Where is the tensioner on a jeep serpentine belt?
That silver, oval-shaped metal arm is the tensioner. Now, insert your wrench/bar in the hole pictured in step two. As you are standing at the front of your Jeep facing to the rear, you want to use your wrench/bar to rotate the belt-tensioner arm clockwise (depicted by blue arrow below); this will be towards the ground in most cases.