What does Softail mean on a Harley Davidson?
Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine. In other words, not only will the Softail engin… Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine.
What does it mean when your Harley won’t crank?
Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine. In other words, not only will the Softail engin… Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine. In other words, not only will the Softail engin…
Can a Dyna Super Glide crank but not start?
Discussion in ‘ Electrical ‘ started by 92chrisdyna, Aug 16, 2010 . 92 dyna super glide my bike cranks but wont start I have power to the coil and no spark I replaced the coil and nothing where do I go from here I am new to harleys and new to the forum and love some help from you guys thanks
What causes a Harley Davidson to not start?
Open up the nose cone end and see if it is just really dirty in there which can happen if the seal is leaking oil. If not, check that the signal wires from the ignition wire to the coil are not corroded at the coil, or damaged where they come out of the nose cone.
Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine. In other words, not only will the Softail engin… Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine.
Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine. In other words, not only will the Softail engin… Harley Davidson Softail will not crank refers to when the crankshaft will not turn so as to start the engine. In other words, not only will the Softail engin…
Discussion in ‘ Electrical ‘ started by 92chrisdyna, Aug 16, 2010 . 92 dyna super glide my bike cranks but wont start I have power to the coil and no spark I replaced the coil and nothing where do I go from here I am new to harleys and new to the forum and love some help from you guys thanks
What does it mean if your Harley is not starting?
Harley Wobble – Read More 2. Harley Not Starting – Read More 3. Harley Started to Misfire – Read More 4. Oil Dripping from Harley Air […] […] Harley Wobble – Read More 2. Harley Not Starting – Read More 3. Harley Started to Misfire – Read More 4.
What does it mean when your bike won’t start?
Has fuel, battery was enough to turn starter which usually means there’s enough to fire the ignition if bump-started, spark plug lead is firmly connected, compression seems to exist from the rhythm of the starter and how the rear wheel locked if bumped on the slightly loose surface outside the garage in too low a gear…
What causes a Harley Davidson not to start?
Some other ideas: 1 Problem with security module or key FOB 2 Problem with clutch safety switch, or its wiring (if bike has it) 3 Bad relay (like you said)
When does a motorcycle won’t start diagnosis?
This can be a serious problem that occurs when one or more cylinders in the motorcycle loose compression.
Why does my Harley Davidson bike not start?
If you can start the bike this way; the start switch is probably bad, or a wire may be damaged. Let us know what you find. Sounds like you know what you are doing. You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start.
What to do when your bike won’t start?
A minuscule screen helps keep gunk out of the petcock, but corrosion and bits of stray material can cause flow issues. Rattling the petcock a bit can help dislodge any blockages, but replacement or a deep cleaning might be necessary to get your bike running again.
Why does my Dyna FXDC bike not start?
Alarm, clutch inhibit & neutral safety all come from the TSSM. The TSSM controls the start relay. 09 Dyna FXDC, got power everywhere. Lights,Horn,Turn`s,Fuel Pump,Dash, Turn the key on, hit the run/stop switch, push the start button and Nothing. Not even a click or a buzz. Bike has been sitting for about 2 weeks.
Why is my Harley Davidson Ultra Classic not starting?
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
Why does my Harley Davidson start and stall?
All in all it’s a strong running bike and this is usually just a minor annoyance, still if there’s a quick fix I’d love to hear it.Thanks -Bob A: Bob, the most common reason a m/c will act this way is because of an intake leak. Start the bike cold. Mist the intake flanges with brake cleaner.
If you can start the bike this way; the start switch is probably bad, or a wire may be damaged. Let us know what you find. Sounds like you know what you are doing. You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start.
Alarm, clutch inhibit & neutral safety all come from the TSSM. The TSSM controls the start relay. 09 Dyna FXDC, got power everywhere. Lights,Horn,Turn`s,Fuel Pump,Dash, Turn the key on, hit the run/stop switch, push the start button and Nothing. Not even a click or a buzz. Bike has been sitting for about 2 weeks.
A minuscule screen helps keep gunk out of the petcock, but corrosion and bits of stray material can cause flow issues. Rattling the petcock a bit can help dislodge any blockages, but replacement or a deep cleaning might be necessary to get your bike running again.
What’s the problem with the 2005 Softail Deluxe?
The 2005 Softail Deluxe’s twin-cam engine problem, is something you’ll want to avoid, according to many reviewers on the web. UltraCool says the problem with the Softail Deluxe has to do with some of its perceived cheaper components. Specifically, the plastic shoes on the cam chain wear down due to rubbing.
What should I do if my Harley Davidson won’t start?
Here’s where to start your search when your bike won’t start and you have no idea why. This article applies to the Harley Davidson Touring models (2009-present). So the weekend has finally arrived. Boots on, gloves, jacket and helmet: check. You even checked your tires: 36 front and 38 rear.
What to do if your bike won’t start?
1) Place Bike in NEUTRAL. 2) Remove the fuse cover and locate the start Relay. It is the GRAY one. On the inside cover there is a label that will identify the START Relay. 4) Look at the bottom of the removed gray relay closely. You will see pin notation as follows. 87,,87A,,30,,85,,86. 5) Leave the relay REMOVED from the bike.
What should I do if my Harley won’t start?
Everything works perfectly – Lights, hear the fuel pump kick on, signal, brakes, switches appear fine and I changed the gas to highest just in case and nothing. I checked spark by pulling a plug and starting while on the cyl. and no spark. Put a new coil in it and nothing. Cranks great and all is appearing to be fine but no fire/start?
What does no start on Delphi fuel injection mean?
If you have a no start condition on your motorcycle with Delphi fuel injection. The problem occurs one time and does not return, so is difficult to diagnose. When the condition occurs, a P1010 code – missing password, is normally set. There have been a few reports of a P1009 code – incorrect password also. It appears the turn signal
I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.
Why is my starter not working on my Harley?
That black wire with the red tracer should be sending 12v to the starter relay. Be sure that this wire is not damaged or pinched anywhere in its travel. This will be more common when wires have been routed through the bars, or switch housings/switches have been changed. Don’t forget to use your multimeter inside the switch housings too.
If you have a no start condition on your motorcycle with Delphi fuel injection. The problem occurs one time and does not return, so is difficult to diagnose. When the condition occurs, a P1010 code – missing password, is normally set. There have been a few reports of a P1009 code – incorrect password also. It appears the turn signal
Why does my Clutch not shift into neutral?
Running a barnett clutch, it did get a little easier when I went to atf fluid in the primary. My friction zone starts about a quarter to a third out on the leaver. That is the #1 reason for difficulty shifting into neutral – a clutch that needs to be adjusted.
What makes it hard to find neutral on a Harley Davidson?
Clutch drag is what makes it hard to find neutral at times. Adjust the clutch correctly and use ATF . :thumbsup Shifting after motor is off will not hurt the transmission as long as you don’t jam it into gears .
Why does my Softail engine not turn over?
Are you getting voltage to one side of the coil with the switch on the run position. will the coil make a spark when you pull the coil wire out and hold it close to the coil and turn engine over. If no spark at coil the magneto may be bad unless there is there is some solid state controls in-between.
What to do if your Softail won’t fire?
Check the igniotion first and let me know. First take your voltage tester and see if you have 12 volts with the ignition on at the coil (white wire). If not then chase the problem back to where you have 12 Volts and fix it. If you have 12 vlt at the coil then you either have a bad pickup or ignition module.
Are you getting voltage to one side of the coil with the switch on the run position. will the coil make a spark when you pull the coil wire out and hold it close to the coil and turn engine over. If no spark at coil the magneto may be bad unless there is there is some solid state controls in-between.
What to do if your Harley won’t start?
Take the 2 relays and swap them……….see what happens. Check positive and neagative cable tightness at starter and ground lug. The oil spill thing has nothing to do with the no start issue. too.) then see if the bike will start. you can use starting fluid thru the intake but use it spareingly.2 short spirts of s/ fluid.
How to reset check engine light on Harley Davidson Softail?
Turn the ignition switch, which is located in the center of your gas tank, to the OFF position and then turn the Run/Stop switch, which is located on the right side of your handlebar, to the RUN position. Figure 2. Ignition on the tank and Run/Stop on right grip. Press the odometer’s reset button and keep it pressed.
Take the 2 relays and swap them……….see what happens. Check positive and neagative cable tightness at starter and ground lug. The oil spill thing has nothing to do with the no start issue. too.) then see if the bike will start. you can use starting fluid thru the intake but use it spareingly.2 short spirts of s/ fluid.
Check the igniotion first and let me know. First take your voltage tester and see if you have 12 volts with the ignition on at the coil (white wire). If not then chase the problem back to where you have 12 Volts and fix it. If you have 12 vlt at the coil then you either have a bad pickup or ignition module.
Why does my Softail air cleaner not fire?
My softail will not fire, it just turns over until I run the battery down and it will not turn over any more. I tried spraying starting fluid into the air cleaner with no success.
Why is my Harley Davidson Softail not working?
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
How does a Harley Davidson Softail engine work?
This article applies to the Harley Davidson Softail. To start your Softail’s engine and keep it running, there must be a constant supply of electricity going into and out of the battery.
What should battery voltage be on Harley Davidson Softail?
Attach the positive voltmeter lead to the positive battery post and the negative to the negative. The battery should read above 12.2 volts. If your Softail will start, keep the voltmeter connections in place and start the engine. The charging system should now be working and battery voltage should increase to above 14 volts.
What should my Electrical reading be on my Softail?
A normal reading is around 100 amps. If your reading is higher, you may have mechanical engine damage, a faulty starter, or high resistance in the wiring routed between your starter and battery. The wiring can be checked fairly quickly. Place your multimeter’s negative lead on the starter ground wire and the positive lead on battery negative.
What to do if your Harley Davidson is not starting?
If you only have spark on the front cylinder, swap plug wires (front to rear, rear to front ). Now see if you (only) have spark on the rear cylinder. If you do not have power to the coil; Use a small jumper wire and power your coil directly from the battery. This will will bypass your harness and switches.
What should I do if my GarageBand is not working?
Resetting preferences doesn’t affect your project files, presets, or patches. However, you do lose any custom preference settings you might have made. Choose GarageBand > Preferences, and note any specific preference settings you’ve made. Close GarageBand. In the Finder, choose Utilities from the Go menu. Open Terminal. Restart your computer.
With the “Duh” issues resolved and your bike still not starting, it’s time to investigate further into your engine spark. A great place to start is at your spark plugs. When you start here, you can keep tracing it back until you find your ignition or spark issue.
What to do when your Harley Davidson won’t start?
Try neutral with clutch pulled in. Also battery connections , solenoid wire. The security system lights only flash after I turn off the bike. I have the bike in neutral and I even tried pulling in the clutch a couple of times. I checked the wire to the solenoid and it had power.
What causes a motorcycle to not start up?
One potential issue that might be keeping your motorcycle from starting up is a clogged petcock. The petcock is a fuel control valve. It controls the gas flow between off, on, and reserve settings. Clogged petcocks are a common issue that riders often bring up in forums.
Why does my motorcycle not start with the side stand down?
Newer bikes (and some older ones) may refuse to start with the side stand down. Along with all the other high-tech sensors that are on board, your motorcycle might have a built-in code that keeps the ignition from starting if your kickstand is engaged.
What does it mean if your Harley won’t start?
If that test was a “pass”, it would eliminate with 100% certainty, the starter and starter solenoid from the picture and all the associated wiring, all the way back to the fuse box. It would demonstrate that all the heavy starter grounds were OK also. Passing just that one simple test would eliminate a dozen possible items it could have been.
Why does my Harley Davidson have no spark?
No spark. Good fuel. The service dept. told me that the coil hardly goes bad. It might be the crankshaft sensor. I replaced it and it started.
How does the spark plug work on a Harley Davidson?
The primary receives 12 volts from the motorcycle and allows voltage to build; transferring voltage to the secondary winding where voltage is increased to thousands of volts and released through the spark plug wires to the spark plug.
Everything works perfectly – Lights, hear the fuel pump kick on, signal, brakes, switches appear fine and I changed the gas to highest just in case and nothing. I checked spark by pulling a plug and starting while on the cyl. and no spark. Put a new coil in it and nothing. Cranks great and all is appearing to be fine but no fire/start?
When did spark plugs for Harley Davidson come out?
This pair of spark plugs is designed to fit a large number of Harley Davidson motorcycles produced from 1999 until 2016. The plugs are designed with technology that provides you with an additional 3HP.
Why does the cam chain on a Harley Davidson wear out?
The cam chain system is a vital component in the functioning of a Harley’s Twin-Cam engine. Zeroing in on this specific cam component can make you as a buyer aware of its potentially faulty design. The cam chain system of a Harley is designed with plastic shoes that ride on the cam system. The plastic shoes will eventually wear out due to friction.
The term Softail refers to bikes made in the rear with hidden shock absorbers to reduce shocks. The Softail frame is designed to resemble the star frame of yesteryear, yet offers the comfort of suspension.
What kind of wheels does a Harley Softail have?
2000 Custom CUSTOM BUILT HARLEY SOFTAIL, CUSTOM BUILT SOFTAIL- PM WHEELS & BRAKES- RUNS AND LOOKS HOT – 2000 SOFTAIL CUSTOM BUILD IN COOL DENIM BLack finish.
Is there a Harley Davidson Softail for Thunderbike?
Numerous conversion examples can be found in this category. This gallery shows Thunderbike custombikes based on Harley-Davidson Softail motorcycles with stock frame. The database shows thousands of photos and useful information about the custom parts. You´ll find more information on new Harley-Davidson Softails or used H-D Softail on our webiste.
Is it possible to rebuild a Harley Softail?
IF I WERE GOING TO KEEP THIS BIKE MAYBE I WOULD REBUILD THIS ONE BUT SINCE MY BIKE RUNS FINE I JUST DON’T NEED TWO HARLEYS SOLID RIM ON REAR WITH SLICK METZELER TIRESEAT RECENTLY RECOVEREDBOTH TIRES ARE USE-ABLE FOR A WHILE BUT NOT LONGBRING ANYONE YOU LIKE TO INSPECT IN PERSONI CAN LOAD IT IN YOUR TRUCK WITH MY ROLLBACK.
How to watch Harley Softail Breakout by the bike exchange?
Harley Softail Breakout Custom by The Bike Exchange BIKERS!!! WATCH THIS HARLEY —COMING BACK STRONG W LEE 704-740-0705 If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How many CVO Softails did Harley Davidson make?
ThunderPress mentions that only 1500 of the CVO Softail were made for the model year, which we’re sure makes collectors happy. Other features that were considered unique that the Convertible was the only bike at the time of any Harley model to offer keyless ignition and lockable, soft-sided panniers.
Are there any problems with the new Harley Davidson?
This is one Harley to avoid. Yes, it’s a new bike, but the Livewire has had numerous problems in its short on again off again life. The electric bike has experienced problems with its charging system, which in turn led Harley to stop production of the bike in October of 2019.
Is the Harley Davidson LiveWire still in production?
Yes, it’s a new bike, but the Livewire has had numerous problems in its short on again off again life. The electric bike has experienced problems with its charging system, which in turn led Harley to stop production of the bike in October of 2019.
When did Harley Davidson softail frame come out?
The Softail frame is designed to resemble the star frame of yesteryear, yet offers the comfort of suspension. The model family has been labeled with the product code “FXST” since the start of production in 1984 and has been expanded with time and many options.
Are there slip ons on a 2017 Softail Slim?
I have a 2017 Softail Slim and on Monday I am having the dealer install Screamin’ Eagle Street Canon Slip-ons. (those and a windshield were negotiated for free when I purchased the bike) For now I’m sticking with the stock air kit. Does anyone have this setup without adding an ECM tuner? If so are you happy with the bikes performance?
Why does my Softail not get a spark?
Most likely your ignition coil has gone bad. If it is getting spark you may have a bad crank position sensor screwing up your timing. Check the igniotion first and let me know. You can’t post conmments that contain an email address. An expert that got 20 achievements.