What does a Hondata do?
What does Hondata do? Hondata modifies standard Honda engine computers (ECUs), adding features and expanding the capabilities of the ECU (e.g. for forced induction). These modifications are available either as a reflash, or a fully tunable system.
What do I need for Hondata?
To use a Hondata system, you will need to use a compatible OBD1 ecu from the list at http://www.hondata.com/ecus.html. You can then use the Hondata s100, s200 or s300 depending on what options you want. I would recommend the s300.
Can you tune a stock ECU?
A modified stock ECU is typically one that is eeprom “chip” based. Using a real time programmer in place of the eeprom chip on the ECU board, a custom tune can be performed.
Can Honda tune my car?
Now you can benefit from Hondata’s state of the art custom tuning software and calibrations with no downtime. Just drive your Honda or Acura to any one of the participating dealers. If you want to go a little further the Hondata dealer can perform a custom tune.
Does tuning shorten engine life?
More horsepower means greater stress for all the units of the aggregate and more wear of the moving parts. However, this does not necessarily mean that tuning will shorten engine life. If done properly tuning will not leave any consequence on the engine other than improving its performance.
When did the Honda B18A engine come out?
In 1990, a new B18A engine was added to B-series of Honda engines; this engine first appeared in 1990 on Acura Integra. B18 cylinder block is made of aluminum, its deck height is 211.84 mm, and bore diameter is 81 mm. Inside this unit, an 89 mm stroke crankshaft and 137 mm long rods were installed.
How big is the throttle on a Honda B18C?
The size of the throttle body: – B18C Type R – 62 mm – B18C – 60 mm – B18B – 60 mm
What are the valve clearances on a Honda B18C?
B18C valve clearances (cold) are the following: intake 0.15-0.19 mm, exhaust 0.17-0.21 mm. Among other things, a 2-stage intake manifold was used for B18C. The firing order was 1-3-4-2. The size of the throttle body:
How big is the fuel injector on a Honda B18?
– B18B – 60 mm – B18A – 58 mm The size of Honda B18 fuel injectors was 240 cc. In addition to B18, B-series included other engines: B16, B17, and B20.