What do you need to know about Toyota c1345 code?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? Linear Solenoid Valve Offset should be initialized (calibrate to zero). If problem persistss, Skid Control ECU may need to be replace. The cost to diagnose the C1345 TOYOTA code is 1.0 hour of labor.
What does c1345 Toyota Skid Control ECU mean?
C1345 TOYOTA Meaning The skid control ECU stores and corrects the difference in each individual part such as the stroke sensor, actuator soelnoid, and stroke simulator solenoid. Perform initialization of linear solenoid valve and calibration if these parts are replaced.
How much does it cost to repair a c1345 Toyota engine?
The cost of diagnosing the C1345 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
https://www.youtube.com/watch?v=OiI_IqfUivo
How much does it cost to repair a c1345 Toyota?
The cost of diagnosing the C1345 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How to get the normal ABS code on a Toyota?
Set the jumper on the “WA” and “WB” terminals. Turn the ignition on. Press the brake pedal eight or more times in the interval of three seconds. The indicator should output the normal code (flashing 2 times per second). Turn the ignition off. Remove the jumper from the terminals “TC” and “E1”. Make sure that the ABS indicator goes out.
How to erase an error code on a Toyota?
If the codes are saved, you need to perform the cleaning procedure: – alternately, once per second, connect the terminals “TC” and “AB” (the pause between the closures is less than 0.2 seconds) – after the third closing of the output “TC” the indicator should blink at a high frequency – the codes are erased.