What color are Miss Dig flags?
Utility Flag Marking Cheatsheet
| Flag Color | Use |
|---|---|
| Red | Electrical utilities like power lines |
| White | Excavation |
| Pink | Temporary survey markings |
| Yellow | Gas lines like petroleum, steam |
What do the utility marking colors mean?
Red can indicate the subterranean presence of power lines, cables, conduits, transformers, or even lightning cables. Red stands out against most surfaces, and for that we can all be glad. Red means “Be careful!” Yellow Means natural gas, petroleum, or steam.
What are the color codes for Miss utility?
RED – Electric Power Lines, Cables, Conduit and Lighting Cables.
What are the colors for utilities?
APWA Uniform Color Codes.
What do yellow flags in yard mean?
YELLOW – Gas, Oil, Steam Petroleum or Gaseous Materials. ORANGE – Communication, Cable TV, Alarm or Signal Lines, Cables or Conduit. BLUE – Water, Irrigation and Slurry Lines. GREEN – Sewers and Drain Lines.
What are the little blue flags in my yard?
If you found blue flags, you can try your water company. For red flags, try to call your Electric Company. For orange flags, you could try to call your telephone or Cable TV company. For yellow flags, try to call your natural gas provider, and for green flags try to call your local sanitary sewer authority or DPW.
What is Miss Utility?
Miss Utility helps homeowners with just one call. Miss Utility is your partner when it comes to safe digging. With one call, Miss Utility will process your locate request and notify the owner-member utilities of your digging plans.
How are utility lines marked?
Utilities will mark their buried lines on your dig site. State laws vary, but generally, utility companies have a few days to respond to your request. Each utility type corresponds to a specific color of paint or a flag — for example, gas lines are marked with yellow paint or flags.
What does orange spray paint on grass mean?
YELLOW: Gas, Oil, Steam, Petroleum or Gaseous Materials. ORANGE: Communication, Alarm or Signal Lines, Cables or Conduits.
What does a yellow utility flag mean?
Does Miss Utility mark Verizon?
Verizon joins the Common Ground Alliance and its 1,400 members across the U.S. to highlight 811, which was established in 2005 by the Federal Communications Commission to prevent the unintentional strikes of underground utility lines while digging.
Can I remove utility flags?
According to Krueger, once a project is completed, it’s the responsibility of the contractor to remove the flags. If the flags are removed before work is done, buried utility lines could be damaged and workers could be injured.
What are the color codes for underground utilities?
The American Public Works Association (APWA) recommends the following guidelines be used when marking underground utilities. White = Proposed Excavation Pink = Temporary Survey Markings Red = Electric Power Lines, Cables, Conduit and Lighting Cables
Why are there color codes on my lawn?
Utility color codes are used to identify existing underground utilities in construction areas with the intent of protecting them from damage during excavation. This is done with either flags or a special spray paint, neither of which will cause long-term harm to your lawn.
What kind of paint do utility departments use?
The utility departments that mark their utilities usually use inverted spray paint, also known as “upside down paint”. EngineerSupply sells inverted spray paint by the case.
How are utility lines marked in the ground?
Underground utility designating is the process of identifying and marking underground utilities. These utilities may include lines for electrical, telecommunication, natural gas, water, sanitary sewer, storm drains, etc. They are usually marked on the surface of the ground by spray paints and pin flags using their corresponding colors.