What causes intermittent wipers to stop working?
Your wiper relay could be bad if the low and high speed wiper positions function properly but the intermittent function stops working. Any combination of positions working or not working is a good indication of a faulty relay.
Why do my wipers only work sometimes?
When the relay is faulty, the windshield wipers will only work at the same speed that the last relay signal was sent. If you make a change in the settings and the wipers don’t react, it’s most likely due to a malfunction in the intermittent wiper relay.
Why do my windshield wipers not work sometimes?
The most common electrical problem in your windshield wiper system is a blown fuse so that’s a good place to start. The fuse will most likely be in the main fuse block under the hood. Other problems could include a burnt out wiper motor, a problem with the wiper control switch or a problem with the delay module.
How do you reset windshield wipers?
How to Reset the Windshield Wipers
- Remove the plastic cover between the hood and the windshield that hides the wiper motors and arms.
- Use a socket wrench to remove the nut located at the center of the wiper motor.
- Position the wiper blades in the correct park position.
- Turn the wipers on to test them.
How do you test a wiper motor switch?
Use the fuse pattern shown on the cover and locate the wiper motor fuse. Test the fuse using your twelve volt test light. Clip the ground lead to a solid ground source and touch the positive lead to each side of the fuse. If the test light lights up on both terminals, the fuse is good.
What causes the intermittent wiper to stop working?
If you make a change in the settings and the wipers don’t react, it’s most likely due to a malfunction in the intermittent wiper relay. This can lead to a potentially unsafe driving situation as sometimes we encounter weather conditions that require the use of the intermittent switch.
When do I Know my wiper relay is bad?
One of the quickest indicators that a problem exists with the intermittent wiper relay is when the wipers are not intermittent and only work at one speed. The relay switch sends an electrical signal to the module that controls the operation of the wiper motor and gears inside.
Why does my car wiper make a humming noise?
Humming noise when the wipers are on In some instances, you may notice that there is a strange humming noise when trying to operate the wipers on the car. This is usually caused by the wiper motor not getting the power that it needs due to a bad relay.
When do windshield wiper blades only work one speed?
The windshield wiper blades have one speed. One of the quickest indicators that a problem exists with the intermittent wiper relay is when the wipers are not intermittent and only work at one speed.