What causes driveline vibrations on a Nissan Pathfinder?
For the Nissan R51 Pathfinder, driveline vibrations may be attributable to wheel problems, prop-shaft universal joints or, for automatic models, the torque converter (particularly from 80-100 km/h, see below).
How to fix vibration in Nissan R51 Pathfinder?
Nissan R51 Pathfinder: seatback vibration at highway speeds 1 Removal of the seatback board; 2 Application of foam tape to a mass (vibration) damper and installation of the damper; 3 Cutting the J-clip on the seatback to assure free movement of the mass damper; and, 4 Re-assembly of the seatback. More …
Why is my Nissan Pathfinder making a rattling noise?
Re-assembly of the seatback. For Nissan R51 Pathfinder models fitted with the 4.0-litre V6 petrol engine, a rattling noise may be heard around 2000rpm – this is the power valve actuator dithering and can only be fixed by replacing the manifold, complete with new valve.
Are there any recalls on the Nissan Pathfinder?
In November 2009, Nissan USA issued service bulletin NTB09-128 for 2005-10 Nissan R51 Pathfinder vehicles with the 4.0-litre VQ40 V6 petrol engine. In these vehicles, there may be a high frequency buzzing/whining noise from the secondary timing chain system that increases in frequency with engine speed (rpm).
For the Nissan R51 Pathfinder, driveline vibrations may be attributable to wheel problems, prop-shaft universal joints or, for automatic models, the torque converter (particularly from 80-100 km/h, see below).
Nissan R51 Pathfinder: seatback vibration at highway speeds 1 Removal of the seatback board; 2 Application of foam tape to a mass (vibration) damper and installation of the damper; 3 Cutting the J-clip on the seatback to assure free movement of the mass damper; and, 4 Re-assembly of the seatback. More
Re-assembly of the seatback. For Nissan R51 Pathfinder models fitted with the 4.0-litre V6 petrol engine, a rattling noise may be heard around 2000rpm – this is the power valve actuator dithering and can only be fixed by replacing the manifold, complete with new valve.
How can I get the vibration out of my Nissan truck?
3.) Take the truck out of 4-low (or jack up the front wheels) 4.) rotate the front drive shaft 180 degrees to reach the other 4 bolts and remove them. 5.) Done your drive shaft is out – put the transmission back into 2wd, and take a spin to see if your vibration is gone.
What causes a Nissan Pathfinder suspension to fail?
The ball joints could fail in some circumstances, causing separation of the ball joint components; if this occurred while the vehicle was being driven, the separation of the ball joint would cause the suspension to fail, posing a serious safety hazard to vehicle occupants and other road users.
Are there any problems with the 2005 Nissan Pathfinder?
CarComplaints.com Notes: The 2005-2007 Pathfinder appears to have a widespread defect where coolant leaks into the transmission, causing transmission failure around 90,000 miles. Repair costs are typically upwards of $3,500.
When does a Nissan truck vibrate the most?
Also the Truck will vibrate while drive if i put the gear in Neutral, however it feels worst under acceleration especially between 60 km/h (40MPH) and 100 km/h (60MPH). Any pointers will be appreciated. Last edited by cpta2020 on Wed Sep 14, 2011 7:02 am, edited 3 times in total.
When does the vibration start to go down?
The Vibration changes Frequency at around 120 km/h (80MPH) and becomes less noticeable. Also the Truck will vibrate while drive if i put the gear in Neutral, however it feels worst under acceleration especially between 60 km/h (40MPH) and 100 km/h (60MPH). Any pointers will be appreciated. I had this very similar problem.
What are the competitors of the Nissan Pathfinder?
The main competitors of Pathfinder are Toyota Highlander / Prado , Honda Pilot, Ford Explorer, Chevrolet Traverse, Mazda CX-9, Mitsubishi Pajero and other mid-size SUVs. Nissan Pathfinder is not an exception from the SUVs of this class, and the same as they it uses quite big engines.
The ball joints could fail in some circumstances, causing separation of the ball joint components; if this occurred while the vehicle was being driven, the separation of the ball joint would cause the suspension to fail, posing a serious safety hazard to vehicle occupants and other road users.