What are the uses of the alloy EN AW-6082?
The alloy EN AW-6082 is a high strength alloy for highly loaded structural applications. Typical applications are scaffolding elements, rail coach parts, offshore constructions, containers, machine building and mobile cranes.
Which is the correct temper for aluminium alloy 6082?
Aluminium alloy 6082 also corresponds to the following standard designations and specifications but may not be a direct equivalent: The most common tempers for 6082 aluminium are: Alloy 6082 T6 & T651 is typically supplied as Plate and Shate. 6082 has very good weldability but strength is lowered in the weld zone.
Is there an alloy 6082 for the T6?
In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used. Aluminium alloy 6082 also corresponds to the following standard designations and specifications but may not be a direct equivalent:
Which is a stronger alloy 6061 or 6082?
Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
What is the AA designation for aluminum 6082?
6082 (AlSi1MgMn, 3.2315, H30, A96082) Aluminum 6082 aluminum is a 6000-series aluminum alloy: there is significant alloying with both magnesium and silicon, and the alloy is formulated for primary forming into wrought products. 6082 is the Aluminum Association (AA) designation for this material.
Can a 6082 plate be used in a T6 temper?
It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series. In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used.
Which is the best wire for welding aluminium alloy 6082?
Welding. Aluminium alloy 6082 has very good weldability but strength is lowered in the weld zone. When welded to itself, alloy 4043 wire is recommended. If welding Aluminium alloy 6082 to 7005, then the wire used should be alloy 5356.