What are the two fans in front of radiator?
Most often, a pusher fan is used in cars with significant aftermarket modifications and is typically an electric fan. The purpose of a pusher fan is to force more air through the vehicle’s radiator to aid in engine cooling at lower speeds.
Do radiator fans always spin?
This unit spins when the engine is running, and it always spins at the same rate as the engine. The faster the engine is running the faster the fan will spin. If you find that your vehicle is not cooling off properly, the radiator fan might be the culprit. You can replace the fan with a new unit.
Does a pusher fan need a shroud?
Remember, shrouds cannot be used on pushers. Fan shrouds need a way to mount to the radiator.
When does the radiator fan come on in a Honda Accord?
No idea. If you have 2 fans (some only have one) the a/c fan should come on as soon as you turn the a/c and the ignition on. The cooling fan may never come on, depending how hot the engine is. 15 people found this helpful. I have same issue I’m driving Honda Accord 2003 model. 2.4ltr 4 cylinder.
Is the a / C fan the same as the radiator fan?
No they should cycle like that, one fan is for engine cooling the other is for A/C. The A/C fan will start to stay on longer as the pressures rise in the high line for temperature exchange. The other will cycle as engine temps rise and fall.
Why does coolant level drop on Avalon XL?
I noticed on my 2000 Avalon XL that the coolant level in the overflow reservoir drops a couple inches every year. I understand that temperature affects the level reading; however, I usually check first thing in the morning and compare the readings in similar ambient conditions (i.e., similar weather conditions, etc.).
Why is my radiator not working when the AC is on?
I checked it while it is on cold state, but then when turn the AC ON the Radiator Fan turn on, so I let the AC ON while i drive my car, after 30mins driving if i turn the AC OFF, the RADIATOR FAN still dont work, even the Radiator Temp was hot. The coolant temp has to be hot for the fan to come on.