What are the torque values for lock nuts?
IFI-100 does not govern lock nuts above 1″. The values shown in the chart are to be used as a mid- range guideline. ** Torque values for 1/4″ and 5/16″ sizes are in inch lb. All other torque values are in foot lb. Grade C Grade B Grade G Phone: 1-800-558-2808 • Fax: 1-800-553-8769 • www.imperialsupplies.com A56 BOLT CLAMP LOADS
Where can I find the torque specification guide?
Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear.
What happens if your spindle nut is over torque?
It will also leave your spindle nut under or over torque resulting in hub assembly failure. Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life.
How much torque does a ConMet hub cap torque?
Torque the hub cap bolts in a star pat-tern to 12 to 18 ft. lbs. Torque the drive axle bolts or nuts per the drive axle manufactur-ers recommendation. A ConMet PreSet hub cap is required for trailer hubs not equipped with tire inflation systems. One Piece Spindle Nuts Torque a one piece spindle nut to 300 ft. lbs. while rotating the hub.
What’s the torque of a t axle nut?
Tighten the adjusting nut to a torque of 200 ft-lbs, while rotating the wheel. STEP 3. Initial Back Off: Back the adjusting nut off one full turn. STEP 4. Final Adjusting Nut Torque: Tighten the adjusting nut to a final torque of 50 ft-lbs while rotating the wheel. T AXLE NUT TORQUE TYPE SIZE SPECIFICATIONS
What’s the torque on a double jam nut?
Double Jam Nut Systems:Torque the inner spindle nut to 300 ft-lbs while rotating the hub. Advance the inner nut as necessary to engage the locking ring. DO NOT BACK OFF THE SPINDLE NUT. Install the outer spindle nut and torque it to 200 ft-lbs. Be sure to engage any locking device.
How much torque does a preset hub ConMet have?
PreSet® Hub Torque Specifications Item Measurement Torque (ft-lbs) Notes Ball Seat Wheel Nut 3/4 – 16 1 1/8 – 16 450 – 500 Always tighten the top nut first or pilot damage may result. Do not lubricate the faces of the hub, drum, wheel or on the ball seats of the wheel nuts. The last nut rotation should be with a calibrated torque device. Hub
Torque the hub cap bolts in a star pat-tern to 12 to 18 ft. lbs. Torque the drive axle bolts or nuts per the drive axle manufactur-ers recommendation. A ConMet PreSet hub cap is required for trailer hubs not equipped with tire inflation systems. One Piece Spindle Nuts Torque a one piece spindle nut to 300 ft. lbs. while rotating the hub.