What are the specs of a 2000 Lexus LS400?
The Lexus LS400 features an optional navigation system with a 6-inch LCD screen to point you in the right direction. Adults have ample room to stretch their legs in the outboard seating positions. The middle rear passenger has to s… Show full review The top-of-the-line Lexus sedan bolsters its brakes as the biggest change for 2000.
Are there any upgrades to the Lexus LS400?
Modifications to the Lexus LS400 are extremely popular. While performance upgrades are nothing new, there are some critical building blocks that should be considered to ensure you unleash your vehicle’s maximum potential. Below are a few things worth doing to properly modify your car for horsepower and handling.
How to replace the timing belt on a Lexus LS400?
Disconnect the camshaft position sensor connector from the ignition coil bracket. Disconnect the sensor wire from the timing belt cover. Remove the wire grommet from the timing belt cover. Disconnect the wire clamp from the timing belt cover. Unplug all the wires from the rotor caps and remove the rotor caps.
How big are the sway bars on a Lexus LS400?
Another thing to consider when modifying your Lexus LS400 are sway bars. By default, almost all factory cars are tuned with an understeer bias. This makes them easier to drive at their limit, and much safer. For example, a stock Mitsubishi EVO 8 (AWD Turbo) comes factory with a 24mm front sway bar, and a 22mm rear.
What’s the difference between the Lexus LS 400 and LS400?
The top-of-the-line Lexus sedan bolsters its brakes as the biggest change for 2000. The new Brake Assist feature senses when the driver is making a panic stop and applies maximum braking force faster than the driver’s foot can travel. The rear-drive LS400 is the most expensive sedan from Lexus, Toyota’s luxury division.
Disconnect the camshaft position sensor connector from the ignition coil bracket. Disconnect the sensor wire from the timing belt cover. Remove the wire grommet from the timing belt cover. Disconnect the wire clamp from the timing belt cover. Unplug all the wires from the rotor caps and remove the rotor caps.
How to remove the crankshaft pulley on a Lexus?
To remove the crankshaft pulley you might need a compressor if you are doing the job alone. Otherwise all u need a strength in your hands. To get the crankshaft pulley out you have to rent a special tool caller “harmonic balancer pulley removal kit”. The rent is free at Autozone. Parts.