What are the Smart shift codes for a Freightliner Columbia?
2006 freightliner columbia with a merritor smart shift. The codes that come up are 3D-E7 and SM. Have been too 3 separate shops and none can find the problem.
When do the SMARTSHIFT codes come up on a truck?
They say the codes are read but are not active. The last shop ohmed all of the shift motors and said the are within specs. These codes come up and the truck may run from 1 to 5 days and then the tranmsmission will not shift. So I am stuck in whatever gear this happens at.
What to do if your SMARTSHIFT gets stuck?
Get a small hammer and tap the xy shifter and it should work but if tapping xy shifter fixes the issue I would get another xy shifter because the moter gets stuck Check to see if you’re losing air from transmission air tank and if not your xy shifter gets stuck in gear.
How does shift by wire work on Freightliner?
Move the switch on the shifter to “L” and it boosts engine rpms, shift points and will even downshift gears while applying the engine brake right down through the range. Wondering what gear you are in? It’s up in lights on the dash display or Freightliner’s Driver Message Centre.
Where is the driver message centre on a Freightliner?
• Conveniently located on dash panel, or Freightliner’s Driver Message Centre – constantly alerting driver of gear selection • Provides information on engaged gear and gears available Safety
What are the codes for SMARTSHIFT shift Motors?
The codes that come up are 3D-E7 and SM. Have been too 3 separate shops and none can find the problem. They say the codes are read but are not active. The last shop ohmed all of the shift motors and said the are within specs. These codes come up and the truck may run from 1 to 5 days and then the tranmsmission will not shift.
Where can I buy Meritor parts for my car?
Visit MeritorPartsXpress.com for ordering and information on thousands of parts from Meritor® brands, exact specs, competitive cross-references, 360° images and drawings. A career powered by Meritor is an opportunity to shape the future of technology and deliver solutions that make a positive impact in the world.
Is the Meritor office closed on July 4?
All Meritor offices will be closed July 4, 2018 in observation of the holiday. Our response to COVID-19. Our response to COVID-19. Our response to COVID-19. 01. 02. 03.
What can Autoshift do to make a shift faster?
AutoShift can activate the engine brake to make shifts faster. This can happen even if-the engine brake dash switch is off. If a shift is required while in cruise, AutoShift will interrupt cruise while performing the shift and automatically re-engage cruise after the shift is complete.
Is the Freightliner Columbia 2006 having AC problems?
Freightliner Columbia 2006 is having AC problems. Have truck repair questions? Ask an Expert By continuing to use this site you consent to the use of cookies on your device as described in our cookie policy unless you have disabled them. Freightliner Columbia 2006 is having AC problems. I have A/C problems in…
Why does my Freightliner SMARTSHIFT whine when I accelerate?
I noticed an odd whine, a couple of times, whenever I tried to accelerate further than about 55. It’s a Meritor, but it’s got 534,000 miles and (I’d imagine) a number of different drivers with different driving styles. I guess I’m just worried that I’ll have to let my beloved “Medici” go, as a trade in.
Where does the power go on a Freightliner Columbia?
Head unit (controls in cab at dash or main switch) to plug at firewall. Then power goes to high pressure switch. The power then goes to low pressure switch. Then power goes to A/C clutch.
What kind of engine does a Freightliner Columbia have?
I have a 2006 freightliner Columbia with mbe4000 engine and 12 speed smart shift. 48,000 miles. Going down highway check engine light came on,cruise kicked out, trans stuck in 12th gear. Pulled off ro…
How to find fault code 35 on Freightliner?
Code 35 and CA Technician: Don, Mechanic replied 11 years ago Try this Fault Codes Retrieval/ClearingRetrieving Fault Codes1. Place the shift lever in neutral. 2. Set the parking brake. 3. Turn the ignition key ON but do not start the engine.
What are the fault codes for Freightliner engines?
Engine Fault codes (MID, PID, SID, FMI) FREIGHTLINER. Component Codes (MID) MID / Description / Old Text Message / New Text Message * 128 Engine # 1 ENGINE ENG 130 automatic transmission – † Trans 136 Anti-lock Brake System (ABS) TRCTR BRK Brake 140 Panel, Left INSTRCLST Instr 142 Panel, Right # 1 INSTRCLST MGMT 172 Diagnostic System DIAGNOSTC DIAG
When did the mid code go out for Freightliner?
* On March 7, 1997. If there is no text message, the display area will be blank. Only the MID number will display. * On March 7, 1997. * On March 7, 1997. * On March 7, 1997. 154 Auxiliary IN / OUT Status # 2 AUX INP / OUTP # 2 Aux. In / Out # 2 155 Auxiliary IN / OUT status # 1 AUX IN / OUT # 1 Aux.
When did the SID number go blank on Freightliner?
If there is no text message, the display area will be blank. Only the SID number will display. * On March 7, 1997. If there is no text message, the display area will be blank. Only the SID number will display. * On March 7, 1997. If there is no text message, the display area will be blank. Only the SID number will display. * On March 7, 1997.
Why does my SMARTSHIFT not go into gear?
Elaborate a bit please. Won’t go into gear… while you’re stopped? Like I said in another thread, if an autoshift has the clutch not adjusted correctly, the clutch brake won’t be reached, and the transmission won’t go into gear until the input shaft is stopped.
Which is shift by wire technology does Freightliner use?
The SmartShiftTMcontrol is exclusive to Freightliner. Mounted on the steering column, it provides a convenient interface with Eaton automated shift-by-wire transmissions. SmartShift TM shifT-by-wire Technology
Why does Autoshift not go into any gears?
When i have the truck off and turn key to start position and try to shift gears i can hear the transmission shifting successfully, however once the engine is running it will not shift gears. There are no service lights or error codes being displayed.
How does Autoshift adapt to the changing conditions?
When first starting up and after changing loads, AutoShift needs to adapt to the changing conditions of the vehicle. If the transmission holds a gear while in “D”, simply pull the lever towards you and the shift will be completed. This may have to be done several times before the transmission learns.
What are the error codes for Freightliner Trucks?
FREIGHTLINER Truck Error Codes DTC SPN Component Codes (MID) – MID Description Old – Text Message – New Text Message * 128 Engine №1 – ENGINE – ENG 130 Automatic transmission – Trans 136 Anti-lock Braking System (ABS) – TRCTR – BRK Brake 140 Panel, Left – INSTRCLST – Instr 142 Panel, Right № 1 – INSTRCLST – MGMT
What happens when Autoshift is in ” D ” gear?
When AutoShift is downshifting in “D”it will not complete the shifts below a preset gear (normally 9th gear in an 18 speed transmission) and the vehicle will “coast down” until the driver gets back on the throttle.
Why does my Smart Shift keep flashing F?
The flashing “F” without the usual presence of a fault code is related to a current or previous speed sensor failure. What usually happens is the sensor will crack and eventually break, normally logging a fault code 58. The magnet in the sensor comes out and lodges between two raised sections of the tone wheel.
Why is it important to know how to shift gears?
Learning how to effectively shift gears is a basic skill that continues to grow and improve even for veteran riders. Proper shifting will increase speed, reduce rider fatigue, and improve endurance.
What do you call shifting from high to low gear?
Moving from high to low gear is called “downshifting”.