What are the pinouts for the obd0 ECU?
1. Injector 1 Brown 2. Main Relay Ground Black 1 3. Injector 2 Red Red 4. Main Relay Ground Black 2 5. Injector 3 Light Blue 6. Purge Cut Off Solenoid Valve Green
Which is the correct address for a 1997 ECU?
Very simply, just Right-Click on the Knocksum line, click “Edit”, then under “RequestID” change it to 3E, if not already. The correct address for 1997+ ECU’s is 26.
Can You disconnect pin9 on Mitsubishi evoscan cable?
• Yes disconnecting pin9 on the EvoScan Cable with pliers is ecommended for Mitsubishi AYC/ACD usage (pin9 is only used for subaru reflashing) (the reason for removing pin9 is because Mitsubishi ETACS and AYC/ACD ecus will not datalog until pin9 is removed from the 16pin end of the USB cable.)
What is the ECU pinout on a Honda Integra?
ALTC – Alternator Control White / Green 17. IAB – (Intake Air Bypass Control Solenoid Valve) Integra GSR B18C Pink 18. TCM- (Transmission Control Module) (A/T Related) Empty Slot For 5-spd Civic/Integra 1 9. ICS – (Intake Control Solenoid) H22A White — Empty Slot For Civic/Integra 20. PCS – (Evap Purge Control Solenoid Valve) Red 21.
What do I need to test a 2 wire speed sensor?
There really is not a large amount of tools needed for the test itself, and they are not specialized either. The tools needed for testing either a 2 or 3 wire speed sensor are essentially a multimeter with the clamp leads, and a drill. The 3 wire speed sensor is externally powered, so you will need a power source of some form.
Is the 3 wire speed sensor externally powered?
The 3 wire speed sensor is externally powered, so you will need a power source of some form. First off is testing the 2 wire speed sensor. These sensors are self powered, meaning the revolutions inside the case generate the signal needed to create movement in the speedometer.
How does a speed sensor work on a car?
These sensors are self powered, meaning the revolutions inside the case generate the signal needed to create movement in the speedometer. They start out by attaching the red lead to the signal output and the ground lead (black) to the ground on the speed sensor.