What are the fuses in a Jeep Cherokee?
Fuse Box Diagram (2014) Cavity Blade Fuse Cartridge Fuse Description F06 — — Not Used F07 15 Amp Blue — Powertrain Control Module – PCM F08 25 Amp Clear — Engine Control Module (ECM) F09 — — Not Used
Why is fuse # 24 on my fuel pump blowing?
Fuse #24 (20 amp) is Fuel pump relay output to fuel pump. Fuse #19 (10 amp) supplies 12 volts direct to the PCM. If the fuse is blowing, it has to be because there is too much of a current draw somewhere in the circuit. The purpose of the ASD relay is to cut the power to the fuel pump if there is no Crank signal such as in the case of an accident.
What are the lights on a Jeep XJ?
Dome Light, Courtesy Lights, Glove Box Light, Cargo Light, Radio Memory, Power Mirrors, Teltak Connector Engine Control (ECU) – Fuel Pump, Injectors, Ignition Coil, Oxygen Sensors, Generator Field, Engine Controller Automatic Transmission Controller (ATCU)
Why is the fuse not blowing on my relay?
Replaced relay due to no start, vehicle started but acted as if cold circuit was not working. Drove for a few days like that and then the ASD control fuse (not the 30 amp) started blowing. Im back to square one.. Now Fuse is not blowing but the new relay is now chattering. Please help.
Where is the fuse panel on a Jeep Commander?
The fuse panel is located under the instrument panel just to the left of the steering column near the brake pedal (behind the cover near the OBD). Mem. Sw, Courtesy Lamp (B+) Final Drive Control Module (FDCM), Heater Ventilation, Air Conditioning (HVAC), Switch Bank.
Can a broken fuse be replaced with a new fuse?
Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled. Never replace a broken fuse with anything other than a new fuse. Always use a fuse of the same color. Never change a fuse with another amperage. This can cause damage to the electrical system and fire.