Is there a replacement plug for a Honda block heater?
Good news! The dealer had a replacement cord for the block heater and it fits perfectly. As it turns out the block heater cords are of two designs, 1) straight out plug or 2) angled plug, otherwise they are universal across the Honda lineup of vehicles. What really surprised me was the only $5.00 price tag! Dealer part #: 08T44X HEATER CORD
What should I do if my block heater cord is damaged?
That, in turn, leads to better oil flow that helps the car start easier with fewer smoky emissions. If the plug on your block heater cord becomes damaged, it may become unsafe to use, but the problem can quickly be fixed with common household tools. Cut off the damaged plug with your wire cutter and discard it.
Where is the drain plug on a Honda Accord block heater?
The drain bolt on the V6 is tight, a 19mm socket and large ratchet is required to loosen it. The 4 cylinder’s block drain is INSIDE the threaded area for the block heater, it’s a 10mm allen, and it’s put in with RED loctite, so it’s a real PITA to get out. It’s necessary to remove that plug so the heater element is immersed in the coolant.
Why does an engine block heater need to be plugged in?
An engine block heater keeps the engine oil warm during bitterly cold weather when the heater cord is plugged into a standard electrical outlet. That, in turn, leads to better oil flow that helps the car start easier with fewer smoky emissions.
How to install a Honda engine block heater?
Coolant remaining in the engine jacket will flow out of the drain plug hole when removed. Retain the drain plug to be used if the engine block heater is removed. 6. Install the engine block heater with the aluminum washer into the bolt hole using a 24 mm socket and a torque wrench. Torque the engine block heater to 60 N·m (44 lbf-ft). 3.
Where is the block heater plug in on a Honda Accord?
Installing either isn’t hard. The drain bolt on the V6 is tight, a 19mm socket and large ratchet is required to loosen it. The 4 cylinder’s block drain is INSIDE the threaded area for the block heater, it’s a 10mm allen, and it’s put in with RED loctite, so it’s a real PITA to get out.
Why do you need an engine block heater?
Engine Block Heater is essential for anyone living in an area that experiences freezing temperatures. Not only will your car start faster in freezing temperatures, but you’ll also greatly reduce wear and tear on your battery and engine. Engine block heater is essential for anyone living in an area that experiences freezing temperatures.
Where is the block drain plug on a 4 cylinder Honda Accord?
The 4 cylinder’s block drain is INSIDE the threaded area for the block heater, it’s a 10mm allen, and it’s put in with RED loctite, so it’s a real PITA to get out. It’s necessary to remove that plug so the heater element is immersed in the coolant.