Is there a recall on the Harley Davidson Road King?
In 2015, another recall issued by Harley-Davidson targeted its classic Road King model and other models from 2014 and 2015. This recall involved problems with the clutch system which won’t fully disengage. In the report, Harley-Davidson said this is the result of gas bubbles in the master cylinder clutch.
What’s the throttle response on a 2009 Harley?
2009 Harley Ultra Classic w/25K no past problems in the past, but on 07-12-14. I had a problem with what I found out and is called “Limp Mode”! no throttle response at all other than running at idle.
When did electronic throttle control come out for Harley Davidson?
Harley-Davidson Electronic Throttle Control. In 2008 Harley-Davidson introduced a new throttle system called Electronic Throttle Control (ETC), which eliminates the throttle cables connecting the throttle and the throttle body and replaces them with an electronic connection.
What should the idle speed be if the throttle is turned off?
If the ignition is turned off with the throttle in a position other than 0 percent throttle, the system wants to use a higher rpm as the new idle speed the next time the engine is started. If you shut the bike off at 1,800 rpm, the next time you start the engine it will use approximately 1,400 as the new idle speed.
In 2015, another recall issued by Harley-Davidson targeted its classic Road King model and other models from 2014 and 2015. This recall involved problems with the clutch system which won’t fully disengage. In the report, Harley-Davidson said this is the result of gas bubbles in the master cylinder clutch.
2009 Harley Ultra Classic w/25K no past problems in the past, but on 07-12-14. I had a problem with what I found out and is called “Limp Mode”! no throttle response at all other than running at idle.
If the ignition is turned off with the throttle in a position other than 0 percent throttle, the system wants to use a higher rpm as the new idle speed the next time the engine is started. If you shut the bike off at 1,800 rpm, the next time you start the engine it will use approximately 1,400 as the new idle speed.
Harley-Davidson Electronic Throttle Control. In 2008 Harley-Davidson introduced a new throttle system called Electronic Throttle Control (ETC), which eliminates the throttle cables connecting the throttle and the throttle body and replaces them with an electronic connection.
What to do when your bike wont shift into neutral?
Belray Gear Saver 85/140 Hypoid in the trans and Mobil 1 racing 4T 10/40 in the primary. won’t shift into neutral with engine running. Click to expand… Try the new Amsoil gear lube with neutral finder additive. I have a Wide Glide an shift into neutral many times when my bike isn’t running or running either way its no problem.
What happens if your shift linkage is wrong on a Harley Davidson?
If your shift arms are not properly aligned or your Harley-Davidson gear shift linkage is set to an incorrect length; you may experience binding, which will limit, or diminish your leverage. If you are replacing, or reinstalling the stock shift linkage on your Harley; it is important to assemble it back to the exact position it was in previously.
Is it bad to shift after motor is off?
Shifting after motor is off will not hurt the transmission as long as you don’t jam it into gears . Have a little trouble with my 06 RK also. Running a barnett clutch, it did get a little easier when I went to atf fluid in the primary. My friction zone starts about a quarter to a third out on the leaver.
Can you fix a 1999 Harley Davidson Road King?
IF you find a low mile 1999 and 2000 bike for the right price. THE sure fix is there..
Where are the fuses on a 2010 Road King?
JA: Most vehicles have two fuse panels. Do you know what they look like? Customer: Where are the fuses on a 2010 Road King Classic? JA: What is the mak… read more Flint McCormick 934 satisfied customers My 2012 road at at stop when I use the front brake will
When was the last Harley Davidson Road King built?
LIKE exam. jan 01,2000…. It is a good one, the second 1/2 of 2000 model year had the FIX installed on the cam bearing problem… ALL BIKES- twin-cam engines (regardless of model) built 1999 model year including the first 1/2 of 2000 model year, build date (dec. 15,1999) had the “potential” problem with the cam bearing coming apart..
What to do with a used Harley Davidson Road King?
THE sure fix is there.. NEW style cam BEARINGS (ALL) cam support plate, better chain, different type of tensioner along with a good replacement oil pump ,,, can be had as a KIT from harley. this improvement came on 06 dyna’s and ALL 07’s and up, with a 96 cu. in. motor and a 6 speed tranny…..
Why did my Harley Davidson Road King engine cut out?
Bike hasn’t been ridden in 1.5 years due to medical problems. Bike was stored with fuel in tank but been run to operating temp during that time. No problems when last ridden. I filled tank from 1/4 to full and started test ride. I have put 300 miles on since . Within the first 75 miles, bike developed a engine cut out condition.
What kind of engine does a Harley Davidson Road King have?
Discussion in ‘ Touring Models ‘ started by xcavater, Jun 12, 2012 . I’m buying a 2006 RK with stage 1 (SE air filter, Power Commander 3 and Rineharts true dual) with 6000 miles from a friend.
What are the injectors on a Harley Davidson Road King?
The MoCo updated injectors 2/2006. My bike was manufactured with the old injectors 10/2005. It also has a lousy idle at times, almost feels like the timing is retarded. New injectors on the way.
What’s the problem with my Harley Davidson Road King?
While riding it feels like ignition is momentarily shut off and the bike bucks, continues to run, just an annoyance. Rode and additional 25 miles home, shut bike off, added fuel injector cleaner. Next day, went on a 200 mile ride. First 75 miles, all was well then the cut out condition returned.
Where does the charge lead go on a Harley Davidson?
The battery charge lead runs form the voltage regulator to the positive side of the battery. The AC output lead wire leads from the voltage regulator to the stator.
What happens if you have a bad voltage regulator on a Harley?
If there is anything wrong with the voltage regulator of your precious Harley, you will notice some unusual behaviors from the bike as follows – As I mentioned earlier, a bad regulator cannot control the voltage, which overcharges the battery. When the battery gets overcharged regularly, it causes the gas to escape from it.
The MoCo updated injectors 2/2006. My bike was manufactured with the old injectors 10/2005. It also has a lousy idle at times, almost feels like the timing is retarded. New injectors on the way.