Is the ABS service light still on on my Pontiac Grand Prix?
The ABS service light still on, after replacing the wheel baring, However, it still needs to be fixed. Hpe it helps to anyone. for me steering var, tapping was really anoying because I could feel while accelating and braking. My trac light comes on after a couple miles and therefore my RPM’s shut off.
When does traction control go off in a Grand Prix GT?
When the lights are on and the error messages are on your control panel, the traction control is disabled. I have a 2004 Grand prix GT. Sometimes when im applying the brakes and turning at the same time, my abs kicks in. and sometimes the abs light, trac control light and the service brakes lights all come on.
What causes a bad traction sensor on a Pontiac Grand Prix?
Most likely a bad wheel hub assembly which holds bearings and ABS speed sensor. Jack up the wheel off the ground. Grab it at 12 and 6 position and shake it. Any movement equals bad bearings. This will cause the wheel speed sensor to move around and be read as a faulty ABS/Traction Indicator.
Why does the ABS warning light stay on?
In fact, ABS light stays on unless you fix the core issue. Basically, the warning light alerts the driver that the safety system is no longer active. So let’s find down how ABS system works and learn how to turn off ABS light now! How Does An ABS System Work? Anti-lock brake system (ABS) is very familiar to modern cars.
The ABS service light still on, after replacing the wheel baring, However, it still needs to be fixed. Hpe it helps to anyone. for me steering var, tapping was really anoying because I could feel while accelating and braking. My trac light comes on after a couple miles and therefore my RPM’s shut off.
Most likely a bad wheel hub assembly which holds bearings and ABS speed sensor. Jack up the wheel off the ground. Grab it at 12 and 6 position and shake it. Any movement equals bad bearings. This will cause the wheel speed sensor to move around and be read as a faulty ABS/Traction Indicator.
When the lights are on and the error messages are on your control panel, the traction control is disabled. I have a 2004 Grand prix GT. Sometimes when im applying the brakes and turning at the same time, my abs kicks in. and sometimes the abs light, trac control light and the service brakes lights all come on.
Why does my abs light come on when I Turn on the car?
This is particularly important if the road is slippery or wet. There are different reasons for why the car ABS light would come on. The main reason is from simply turning on your vehicle. After you put your key in the ignition and turn it on, the computer does a test on the anti-lock braking system to ensure it is functioning normally.
Where is the wheel speed sensor on a Grand Prix?
Unplug the faulty wheel speed sensor, located on the back of the wheel bearing and hub assembly at each wheel in the Grand Prix and test the resistance of the sensor using your digital volt/ohm meter set to read resistance. The resistance of a good wheel speed sensor will be1k ohms +/- 10 percent.
How to troubleshoot a Grand Prix ABS light and traction?
Go to step two if the code indicates a wheel speed sensor fault or step five if the codes indicates a solenoid fault. Select “Data” from the onscreen menu and scroll through the list until wheel speed sensor data is displayed on the screen. Test drive the car while monitoring the wheel speed signals, indicated by the fault code, on the scan tool.
How often do you need service lights on a Pontiac Grand Prix?
Pontiac recommends using 3 new bolts for the hub to knuckle mounting. If asked about plastic or steel clip, they are talking about the clip that holds the ABS wire to the mount. NAPA part came with both. I have a 2008 Grand Prix GXP and have had it in to the dealer 14 times in 11 months for the TC/ABS service lights coming on.
Unplug the faulty wheel speed sensor, located on the back of the wheel bearing and hub assembly at each wheel in the Grand Prix and test the resistance of the sensor using your digital volt/ohm meter set to read resistance. The resistance of a good wheel speed sensor will be1k ohms +/- 10 percent.