How to use the fuelpak FP3 on a motorcycle?
CONNECT Plug the Fuelpak FP3 into your bike. 2. TUNE Select the map for your setup. 3. RIDE Enjoy the improved performance and responsiveness of your motorcycle
How is a MAP sensor connected to the intake manifold?
Some MAP sensors are connected to the intake manifold by a hose. Check that the MAP sensor hose is connected and intact. Also, check that the port is free of carbon deposits or other debris, which could block the hose and lead to poor MAP sensor readings. Sensor.
What does the fuelpak FP3 do for Vance and Hines?
The Fuelpak FP3 also backs up your OEM calibration and gives you access to Vance & Hines’ library of thousands of dyno-tuned maps, made by our trained dyno technicians and designed for any combination of performance exhausts and air cleaner components.
Do you have strong opinions on the fuelpak?
Now, I know that many here have some strong opinions on the fuelpak, and if you don’t care for it, and you prefer another system, then good for you, and please move along, we in the post are going to try and help and advice those of us that have chosen to use this system, and unhelpful post will be asked to have removed.
Where does the fuel map setting come from?
The fuel map is the electronic fuel injection system’s setting for regulating the air/fuel mix and is created by engineers during construction and tests of an engine. Fuel map is not a peace of paper, but an engine computer sets of settings.
How are lambda values generated in EFI controller?
Different lambda values can be generated by a fuel map program in the EFI controller. Racing EFI setups most often give the tuner the ability to tailor the fuel map to a specific performance need, such as increased enrichment for throttle action, acceleration, anti-stumble, or cooling.
Which is V & H fuelpak map is fp-0543?
Exchanging program Ideas and experiences. V&H fuelpak map is FP-0543 however this map made the bike stumble just off idle (stop sign take off) V&h e-mailed me back with changes. Mode 1change to 4 — mode 2 to 3 — mode 3 to 6 then verify mode 19 throttle position. Maybe someone can use this.
CONNECT Plug the Fuelpak FP3 into your bike. 2. TUNE Select the map for your setup. 3. RIDE Enjoy the improved performance and responsiveness of your motorcycle
Why do Harley Davidson motorcycles have fuel injection?
It is a sad day in Hogville. The mighty Harley is slowly loosing its carburetor. For those of you who haven’t noticed or are stuck back in the 80’s, a large number of the bikes coming from Milwaukee have fuel injection installed. International environmental concerns have slowly forced the change from carburetor to electronic fuel injection.
How do you check the fuel line on a petcock?
Remove the lower end of the fuel line at the petcock that you want to check. Use air pressure to try to blow any dirt upwards and back into the fuel tank. Be sure to clean out both main and reserve positions. Now test the flow again.
What kind of fuel line is a barb?
I just changed my fuel filter, the connections to which are rubber fuel line fitted over metal pipes with bulging ends — a bit like a barb. (There’s a photo at http://i.stack.imgur.com/oH0Ns.jpg if you like.)
Can a power commander be removed from a bike?
In actuality the opposite is true. A Power Commander and many other add-on tuning devices can be removed without any trace. They leave no electronic tracks in the bike’s ECM. All ECM tuners such as the SERT and SEST do. Just read the “Warranty Implications” on the box.
Where is the ash button on fuelpak FP3?
Long press the map you want to fl ash 3. Press the fl ash button in the upper right corner (lightning bolt) iOS: 1. Go to ‘View/Edit Maps’ 2. Swipe left on the map you want to switch to 3. Press the fl ash button (slot #0) NOTE:Flashing to the stock map can be a useful diagnostic tool if you are having issues with the bike.
The Fuelpak FP3 also backs up your OEM calibration and gives you access to Vance & Hines’ library of thousands of dyno-tuned maps, made by our trained dyno technicians and designed for any combination of performance exhausts and air cleaner components.
Long press the map you want to fl ash 3. Press the fl ash button in the upper right corner (lightning bolt) iOS: 1. Go to ‘View/Edit Maps’ 2. Swipe left on the map you want to switch to 3. Press the fl ash button (slot #0) NOTE:Flashing to the stock map can be a useful diagnostic tool if you are having issues with the bike.
How do you edit a table in fuelpak?
Go to ‘View/Edit Maps’ 2. Press the map you want to edit 3. Select the table you want to edit 4. Select a single cell to change, or change several cells at once by long pressing a cell, then long pressing an adjacent cell to highlight all cells in between 5.